ZHANGJIAGANG HUA DONG ENERGY TECHNOLOGY CO.,LTD |
Verified Suppliers
|
|
ASME 50.8x3.6x6000mm Bevelled Carbon Steel Seamless Tube High Pressure Long Lifetime
Quick Detail:
Standard: ASTM A192 (ASME SA192)
Seamless Medium-Carbon Steel Boiler and Superheater Tubes
Size:(mm)
Out Dimensions: 12.7mm-114.3mm
Wall Thickness: 0.8mm-15mm
Length: 5-25mm
Applications:
It is used for boiler and boiler flue tubes. Including safe end,
vault and supporting tube and super heater min wall thickness
seamless medium--carbon steel tube
Chemical Requirements:
STANDARD | GRADE | CHEMICAL COMPOSITION | |||||||||
C | Si | Mn | P | S | Cr | Mo | Cu | Ni | V | ||
ASTM A192 | A-1 | ≤0.27 | ≥0.10 | ≤0.93 | ≤0.035 | ≤0.035 | |||||
C | ≤0.35 | ≥0.10 | 0.291.06 | ≤0.035 | ≤0.035 |
Mechanical Properties:
Grade | Yield Strength (Mpa) | Tensile Strength (Mpa) | Elongation (%) |
A-1 | ≥255 | ≥415 | 30 |
C | ≥275 | ≥485 | 30 |
Wall Thickness Tolerance
ASME SA-192 | OD | WT | WT Tolerance |
<=38.1 | / | +20%,-0% | |
>38.1 | / | +20%,-0% |
Description:
ASTM A210 is the standard covers seamless medium-carbon steel
boiler and superheater tubes.ASTM A210 also covers
minimum-wall-thickness, tubing sizes, boiler flues including safe
ends, arch and stay tubes. ASTM A210 provides tensile and hardness
properties but only applicable to certain size limitations.
Material manufacturing shall be killed. Tubes shall be made by
seamless process, marked as either hot-finished or cold-finished.
Surface condition shall be specifically stated in the order.
Chemical composition shall conform to the requirements. Elemental
composition other than listed here shall not be permitted. Tension
test, flattening test, flaring test, hardness test, hydrostatic or
nondestructive electric test shall be made on specimens.
Superheater tubes shall be formed without defects and shall
withstand expansion, beading, forging, welding, and bending.
ASTM A192 Seamless Medium-Carbon Steel Boiler Tubes
Seamless Medium-Carbon Steel Boiler and Superheater Tubes
Steel Grde:
Grade A1; Grade C
Packing:
Beveled/black painting/ plastic caps/ in bundles/ steel strips/
wooden protection
Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test(Tensile
Strength, Yield Strength,Elongation, Flaring, Flattening, Bending,
Hardness, Impact Test),Surface and Dimension Test,Nodestructive
Test, Hydrostatic Test.
Surface treatment:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting
Mark:
As requested.
Delivery Condition:
Annealed, Normalized, Normalized and Tempered