|
[China]
Trade Verify
Address: Rm. 1202, Buildiing A, Wanda Plaza, Zhangjiagang, Jiangsu, China
Contact name:Sandy
ZHANGJIAGANG HUA DONG ENERGY TECHNOLOGY CO.,LTD |
|
Verified Suppliers
|
|
|
ASTM A210 Boiler Carbon Steel Seamless Tube Wall Thickness 0.8mm - 15mm
ASTM A210 Seamless Carbon Steel Tube , Boiler Steel Pipe Wall
Thickness 0.8mm - 15mm
Quick Detail:
Standard: ASTM A210/A210M (ASME SA210/SA210M)
Seamless Medium-Carbon Steel Boiler and Superheater Tubes
Size:(mm)
Out Dimensions: 12.7mm-114.3mm
Wall Thickness: 0.8mm-15mm
Length: 5-25mm
Chemical Requirements:
| STANDARD | GRADE | CHEMICAL COMPOSITION | |||||||||
| C | Si | Mn | P | S | Cr | Mo | Cu | Ni | V | ||
| ASTM A210 | A-1 | ≤0.27 | ≥0.10 | ≤0.93 | ≤0.035 | ≤0.035 | |||||
| C | ≤0.35 | ≥0.10 | 0.291.06 | ≤0.035 | ≤0.035 | ||||||
Mechanical Properties:
| Grade | Yield Strength (Mpa) | Tensile Strength (Mpa) | Elongation (%) |
| A-1 | ≥255 | ≥415 | 30 |
| C | ≥275 | ≥485 | 30 |
Wall Thickness Tolerance
ASME SA-210 | OD | WT | WT Tolerance |
| <=38.1 | / | +20%,-0% | |
| >38.1 | / | +20%,-0% |
Description:
ASTM A210 is the standard covers seamless medium-carbon steel
boiler and superheater tubes.ASTM A210 also covers
minimum-wall-thickness, tubing sizes, boiler flues including safe
ends, arch and stay tubes. ASTM A210 provides tensile and hardness
properties but only applicable to certain size limitations.
Material manufacturing shall be killed. Tubes shall be made by
seamless process, marked as either hot-finished or cold-finished.
Surface condition shall be specifically stated in the order.
Chemical composition shall conform to the requirements. Elemental
composition other than listed here shall not be permitted. Tension
test, flattening test, flaring test, hardness test, hydrostatic or
nondestructive electric test shall be made on specimens.
Superheater tubes shall be formed without defects and shall
withstand expansion, beading, forging, welding, and bending.
ASTM A210/A210M Seamless Medium-Carbon Steel Boiler Tubes
Seamless Medium-Carbon Steel Boiler and Superheater Tubes
Steel Grde:
Grade A1; Grade C
Packing:
Beveled/black painting/ plastic caps/ in bundles/ steel strips/
wooden protection
Inspection and Test:
Chemical Composition Inspection, Mechanical Properties Test(Tensile
Strength, Yield Strength,Elongation, Flaring, Flattening, Bending,
Hardness, Impact Test),Surface and Dimension Test,Nodestructive
Test, Hydrostatic Test.
Surface treatment:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting
Mark:
As requested.
Delivery Condition:
Annealed, Normalized, Normalized and Tempered
Factory test and other terms:
1. Hydrostatic or Nondestructive Electric Test
2. Heat Treatment: according to Standard
3. Surface Condition:According to Standard.
4. Grain Size:According to standard
5. Sampling:flattening,flaring,grain size,Marking
6. we provide bevel end,plastic cap, varnish coating, oiled or black painted to prevent rustand other packing
service.
Applications:
1, For evaporator, heat exchangers, condensers, heat transfer equipment and similar pipes.
2, Widely used in the mechanical treatment field, petrochemical industry, transport and construction field
3, Ordinary structural purposes and mechanic structural purposes, for example in construction field, fulcrum bearing etc;
4, The transportation of fluids in the projects and big equipments, for example transport of water, oil, gas etc
5, Can be used in low and medium pressure boiler for the transportation of fluids, for example steam tube, big smoke tube, small smoke tube, generating tube etc
