Zhangjiagang HuaDong Boiler Co., Ltd. |
Verified Suppliers
|
|
Thicker Stainless Steel Superheater and Reheater With ISO9001 Standard
Generally 30 ~ 60 mm.The most common type of flow superheater is serpentine tube.It has a more intensive tube group, decorate in 450 ~ 1000 ℃ flue of the flue gas temperature, flue gas of vertical and lateral erosion.The flue gas mainly transfers the heat to the pipe by convection, and some of the heat is absorbed by radiation.The plate-type superheater consists of a plurality of tube screens, arranged in the upper part of the furnace or at the outlet, belonging to the radiation or semi-radiation type superheater.The former absorbs radiant heat from the furnace flame, while the latter also absorbs some convection heat.In power station boilers above 10 mpa, both screen type and serpentine type superheater are commonly used to increase heat absorption.The wall superheater applied on the inner wall of the furnace is radiant superheater, which is seldom used.The wall-mounted superheater is used in the large capacity power station boiler to form the wall of the furnace top and convection flue.The picture shows the arrangement of several superheater.The small capacity industrial boilers with superheater can meet the requirements only with single stage superheater.
The reheater layout follows the superheater layout, including
convection, radiation and semi-radiation.
The convection reheater has reverse flow, downstream flow and mixed
flow, single coil, double coil, multi-coil, parallel and staggered,
vertical and horizontal type, parallel to the front wall and
perpendicular to the front wall.Convection reheater is the main
reheater that absorbs convection heat.
Radiant reheater refers to the reheater absorbing furnace
radiation.
Semi-radiant reheaters (plate superheater) refer to reheaters that
absorb more radiation from the furnace (more than 1/2 of the total
heat).
The material selection principle of reheater is the same as that of
superheater. Since reheating steam is inferior to superheater in
cooling capacity, the design wall temperature is generally higher
than that of superheater of the same temperature level.Metal tubes
of high temperature reheaters are generally made of alloy steel
(metal tubes containing more than 5% of alloy elements).For
example, 12CrlMoV, steel 102, sa213-t91, sa213-tp304, sa213-tp347,
etc.
Type | Advantages | Disadvantages | Supporting method |
Pendant-type | 1.Firm structural support | 1. Flow blockage by condensed steam 2. Needs slow restart to purge the water that accumulates in the bottom. | supported from above |
Inverted-type | 1.Proper drainage of the condensed steam | 1. Lack the structural rigidity, especially in high speed gas flow | Supported from below |
Horizontal -type | 1. Proper drainage 2. Good structural rigidity. | 1. They do not view the flam directly so they are mainly from the convective type | Usually supported in the vertical gas ducts parallel to the main furnace. |
HD Boiler established in 1985, Zhangjiagang Hua Dong Boiler Co., Ltd. (trading as HD Boiler), is a professional industrial manufacturer, producing utility boiler,industrial boiler,HRSG boiler and all kinds of boiler parts, such as waterwall panels, economizers, air preheaters, superheaters, headers, spiral fin tubes, H-fin tubes, heat pipes etc. HD Boiler is located in Dong Lai Industrial Park, east suburb of Zhang Jia Gang City. The plant’s location is around 150km Expressway to Shanghai Port or 60km State Road to Suzhou or Wuxi, with transportation extending in all directions conveniently and quickly.