| Cat.No | Material | Size | Volume | Cap Color | Packing |
| JZ0B1375 | Glass/PET | 13*75mm | 2-4ml | Light Blue | 100pcs/tray, 1200/1800pcs per carton 1million pcs a 20FT container 2million pcs a 40FT container 2.6milion pcs a 40HQ container |
| JZ0B13100 | Glass/PET | 13*100mm | 5-7ml | Light Blue |
| JZ0B1316 | Glass/PET | 16*100mm | 8-10ml | Light Blue |
INSTRCUTION FOR USE
1. Check the tube first;
2. Insert the blood collection needle into the vein after the skin
disinfection;
3. Put the puncture needle into rubber stopper and the blood will
automatically flow into the tube;
4. After the blood is collected to the calibration capacity, first
pull out the IV needle on body, then pull off the tube.
5. Gently reverse the tube 5-8 times after collection(except no
additive plain tube).
HIGH ALTUTUDE
For collection at high altitude (1600 m/5250 ft or 3000 m/9850 ft)
we recommend high altitude tubes. The vacuum in these tubes
compensates for the lower outer pressure
PRECAUTIONS
1. Do not use tubes if foreign matter is present!
2. To ensure accurate test results, all JINGZ Blood Collection
Tubes must be allowed to fill completely.
3. Handle all biological samples and blood collection
“sharps“(lancets, needles, luer adapters, and blood collection
sets) according to the policies and procedures of your facility.
STORAGE
Store tubes at 4–25°C (40–77°F). NOTE: Avoid exposure to direct
sunlight.
Exceeding the maximum recommended storage temperature may lead to
impairment of the tube quality (i.e. vacuum loss, drying out of
liquid additives, colouring, etc.)
