Servo Motor Alu Plastic Automatic Blister Packing Machine Tablet Blister Machine

Servo Motor Alu Plastic Automatic Blister Packing Machine Tablet Blister Machine

Description

• Pulling length can be adjusted. Mold is fixed by located groove so that it's easy to change mold.
• The machine heats the PVC through heated board and forms by compressed air frothing.
• Speed is controlled by inverter. It Adopts the interface of human machine and PLC controller. Adopt universal feeder for feeding.
• The machine gets the function for Easy Cutting line embossing, batch number embossing and wasted packaging material rewinding.
• Step motor is adopted on the machine for precise controlling on pulling length and saving packing material.
• The heating molds will automatically separate when the machine stops, which contributes to protect the packing material from heated mould.

Specifications

 
Competitive Advantage​​

All of the air supply and synchronization of the machine is controlled by the encoder. All synchronous 

data have been programmed in advance so that there is no need to adjust air supply and pulling time

 manually. The machine in other factory use Cam control, which means the process is mechanical. 

The biggest disadvantage of it is that the friction is inevitably which will lead to wear and tear. As time 

passes, the synchronization is not accurate. But our machines use encoder control, so that there is no

 need to worry about the synchronization. If the encoder is broken, you can also buy it in the local, it’s

 convenient.

Our machine use Stepper motor to control the pulling length. When change the model, there is no need 

to adjust the machine so that it’s convenient and easy operating. What I want to mention is that the 

machines in other factory use gas clip to control the pulling length. It has two shortcomings. First, when 

you change the models, you need to adjust the pulling length manually which means adjusting screw in

 the pulling position. If the Operating workers is unskilled, it will waste the material and time. 

Our machines have PRC (print register control) system, is the cursor version of function, because the 

machine is a stepper motor, so is true of PRC system forever won't generation shift. Other 

manufacturers may be gas clip can only be manually adjusted, a long time after the shift will occur.

OVERALL SKETCH