|
[China]
Trade Verify
Address: Zone D, Songqiao Small and Micro Pioneer Park, Wanquan Town, Pingyang County, Wenzhou City, Zhejiang Province
Contact name:Iris Chen
WENZHOU HUALE MACHINERY CO.,LTD |
|
Verified Suppliers
|
|
|
High Speed Small Horizontal Blister Packaging Equipment GMP Standard for Alu Alu and Alu PVC packaging
This machine is suitable for pack capsules and tablets which request high packaging standard to protect its quality and extend expiration date. This machine combined with two function:aluminum foil cold forming blister and PVC thermal forming blister. The two functions transform by changing modules.
Description
Technical Parameter:
Model DPP-140E | ALU ALU | ALU-PVC | |
Machine Body | Stainless Steel 304/316 | ||
Blanking frequency(times/min) | 15-30 | 20-45 | |
Adjustable pulling length | 30-120mm | ||
Blister Plate Size | Design According To Customers’ Requirements | ||
Max Forming area and depth(mm) | 140*110*12 | 140*110*15 | |
Air compressor(self-prepared) | 0.6-0.8Mpa ≥0.4m3/min | ||
Mould cooling | (Recycle water or circulating water consumption) 40-80 L/h | ||
Power supply(Three phase) | 380V/220V 50HZ 3KW
| 380V/220V 50HZ 5.5KW
| |
Wrapper specification (mm) | Alu Alu Foil 150*(0.14-0.18)*(Φ400) | PVC 150*(0.15-0.4)*(Φ400) | |
Aluminum Foil:150*(0.02-0.15)*(Φ400) | |||
Overall Dimension(L*W*H) (including foundation) | 2400*650*1450 | ||
Dimension of Each Part | 1350*650*1250(front) | ||
1050*650*1450(back) | |||
Weight | About 800kg | ||
Competitive Advantage
1. Our machine use Stepp motor to control the pulling length. When change models, there is no need to
adjust the machine so that it’s convenient and easy operating.The machine in other factory use gas clip to
control the pulling length. It has two shortcomings. First, when you change the models, you need to adjust the
pulling length manually which means adjusting screw in the pulling position. If the Operating workers is
unskilled, it will waste the material and time.
2.All of the air supply and synchronization of the machine is controlled by the encoder. All synchronous data
have been programmed in advance so that there is no need to adjust air supply and pulling time manually.
The machine in other factory use Cam control, which means the process is mechanical. As time passes, the
synchronization is not accurate. But our machines use encoder control, so that there is no need to worry about
the synchronization. If the encoder is broken, you can also buy it in the local, it’s convenient.
3. Our machines have PRC (print register control) system, is the cursor version of function, because the
machine is a stepper motor, so is true of PRC system forever won't generation shift. Other manufacturers may
be gas clip can only be manually adjusted, a long time after the shift will occur.
Machine sketch
Attention
When make ALU ALU product:
Turn off No.2 (Heating box),change the feeder to shaking type feeder and change molds(Forming up and
down molds, sealing up and down molds, blanking up and down molds)
When make ALU PVC product: Turn on all of the stations.
Packing feature
