Home Companies Shanghai Juyi Electronic Technology Development Co., Ltd

JUYI 15A Current Brushless Motor Controller , Rectangle Brushless Speed Controller Motor Driver Board

Shanghai Juyi Electronic Technology Development Co., Ltd

Contact Us

[China] country

Trade Verify

Address: No. 1, lane 1199, yunping road, jiading district, Shanghai,China

Contact name:Lisa

Inquir Now

Shanghai Juyi Electronic Technology Development Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

JUYI 15A Current Brushless Motor Controller , Rectangle Brushless Speed Controller Motor Driver Board

Country/Region china
City & Province shanghai shanghai
Categories Switching Power Supply
InquireNow

Product Details

24VDC 15A current PWM speed control Hall effect BLDC motor driver JYQD-V7.3E3
 
MODEL:  JYQD-V7.3E3
 
OPERATING TEMPERATURE(℃)  :   - 20---85℃
 
OPERATING VOLTAGE(V):    24V
 
Max Power:  500W
 
CONTINUOUS OPERATING CURRENT:  15A
 
PWM SPEED REGULATION:   (1-20KHZ)Duty cycle 0-100%
 
ANALOG VOLTAGE SPEED REGULATION (V):   0-5V
 
Speed pulse signal output:  YES
 
Applications:
BLDC fan
BLDC motor
BLDC cooling fan
BLDC lawn mower
BLDC centrifugal blower
 
 
 
 
Wiring diagram
 
1. Control port
 
5V —Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing operation
 
Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
 
VR —Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
 
EL —Enable port control. Connect 5V or no connect to allow operation, connect GND to forbid operation.
 
Signal— Speed pulse signal output
 
GND—Used for Drive board internal control
 
2. Power port
MA ----motor phase A
MB ---- motor phase B
MC---- motor phase C
GND ----DC-
VCC----DC +

 

3:Hall sensor port
Ha--- Hall a
Hb---Hall b
Hc---Hall c
GND---GND
5V---5V output
 
 
 
Dimensional drawing
 
Application guidelines
1.Confirm that the voltage and power parameters of the motor not exceed the range as specified.
2.Applicable to hall brushless dc motor with Hall at 120°, not all manufacturers' Hall line sequence are corresponding, you can adjust the Hall line sequence or motor three-phase line sequence according to the actual situation, to achieve the best driving effect.
3.JYQD-V7.5E is driver board without housing and heatsink, it can drive the motor below 100 watt without any heatsink, but needs normal ventilation.
4.The 5V output port on the drive board is forbidden to connect external power equipment. It is only applicable to external potentiometer or switch for speed adjustment, commutation and enabling operation

 

 
 
 
 
 
 
 
 

 

 
DOWNLOAD JYQD-V7.3E3 USER MANUAL

Hot Products

230V AC Round Brushless BLDC Motor Driver for axial flow ventilator fan (For Brushless Sensorless DC ...
JYQD-V8.3E brushless DC motor driver board for sensorless motor (For Brushless Sensorless DC motor ) ...
JYQD-V8.8 / JYQD-V8.8D AC input high voltage brushless motor driver board (For Brushless Sensorless ...
JYQD-V6.7 Arduino BLDC motor driver for sensorless BLDC motor 12-24VDC 2A current​ Model number ...
36VDC dual- motor controller JYQD-YL02C for wheelchair,hub motor,electric scooter,electric ...
JYQD-V6.5E 36-72VDC 15A current BLDC motor driver for sensorless BLDC motor​ Model number :JYQD-V6...