Home Companies Changzhou Junqi International Trade Co.,Ltd

D2.5 Deuterium Lamp Power Supply 2.5v 10 Volt UV Detector

Contact Us

[China]

Trade Verify

Address: No.28 Shunyuan Rd, Changzhou City, JIangsu, China

Contact name:Ivanzhu

Changzhou Junqi International Trade Co.,Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

D2.5 Deuterium Lamp Power Supply 2.5v 10 Volt UV Detector

Country/Region	china
City & Province	changzhou jiangsu
Categories	Switching Power Supply

Product Details

Durable Deuterium Lamp Power Supply , Visible Ultraviolet Spectrophotometer DC Power Supply

Introduction:

A small compact size, light weight and one of the biggest advantage is applicable to international mains input Voltage in the 85 -265V AC, no

switching required! The power supply also has control port allowing external control signals (such as CPU or manual) which can easily turn on or off the deuterium lamp. OWPS series deuterium power supply has professional anti-electromagnetic interference design, the

electromagnetic interference reach to grade A. OWPS series deuterium power supply has two models,OWPS-02162.5 apply to the lamp at filament voltage 2.5V, OWPS-021610 apply to the lamp at filament voltage 10V.please make sure you choose the right model for

your usage.

Environmental Requirement:

1. operating environment:

Temp.: 0-40℃

RH: 40℃(20-90)% RH

Pressure: 86-106 KPa

2. storage environment:

Temp.: -40-70℃

RH: 50℃ 90% RH

Pressure: 86-106 KPa

Technical Parameters:

OWPS-02162.5

Voltage input: AC 85 ~ 265V

Maximum input current:0.5A

Filament voltage:

Preheat:DC 2.5V

Working:0V

Maximum anode voltage:

Preheat:DC 125V

Working:DC 80V

Anode current:300mA

Constant flow accuracy: 0.05‰(after starting 1h)

Minimum trigger voltage:DC 550V

Withstanding Voltage:AC 1500V / 1min

Turn off signal: 3 ~ 12V / 1 mA

Dimension:130 * 99 * 40 mm

Net Weight:0.4kg

Wiring:

Figure 1

Figure 1 AC input: L, N, PE( PE must be grounded)

Lamp: Filament-Filament-Anode

Control: ±

Signal:±

The Wire of the lamp must be well connected with the power supply!

The control Port has an optocoupler insulated with the power supply as the circult abobe. Control Mode: High Level: Turn Off, Low Level: Light Turn On. High Level Voltage Range DC3~12v, Current: Above1mA

Signal Port is a Feedback Signal Of The Lamp light on or off, the signal can be sued to CPU.

External Dimension:

Application:

The Deuterium Lamp Power Supply windely used in Landscape Photometer, HPLC Detector, Capillary Electrophoresis, Flue Gas Analyzer, Medical Equipment, Colorrimeter, Pollution Analyzer, etc.