|
Trade Verify
Address: Add：No.2, Ruitai Rd, Guangzhou Hi-Tech Industrial Development Zone, 510670, CHINA
Contact name:Lisa
Guangzhou BioKey Healthy Technology Co.Ltd |
|
Verified Suppliers
|
|
|
Nasal Swab DNA / RNA Nucleic Acid Sample Releaser Disposable Laboratory Consumable kit
Intended use:
This product is used for the pretreatment of the sample to be tested. It is to release the nucleic acid in the sample from the state of binding with other substances, so as to facilitate the detection of nucleic acid by in vitro diagnostic reagent or instrument.
Test Principle:
The protein denaturant in this product can break the cell and virus
structure under the condition of low ionic strength and alkalinity,
denature the protein and release the nucleic acid into the
solution.
Product Pictures:
Product components:
| No. | Components | BIK-E-005H | BIK-E-005H1 | BIK-E-005H2 | BIK-E-005H5 |
| 1 | Swab | 1 | 100 | 200 | 500 |
| 2 | Nucleic Acid Releaser | 1mL/tube | 100* | 100* | 100* |
Specimen:
1. Specimen type
Nasal swab, nasopharyngeal swab and throat swab.
2. Specimen collection and transportation
Biosafety should be carried out in accordance with relevant
regulations.
Extraction Method:
(1) After collecting, put the swab sample into the nucleic acid
releasing agent, fully mix it, and place it vertically at room
temperature for 5- 10 minutes.
(2) The supernatant was centrifuged as the nucleic acid
amplification template for PCR detection.
Note: the volume of template should be less than 25% of the total volume of nucleic acid reaction. I.e. The mixed supernatant added to the reaction system of 20μL shall not exceed 5μL.
Indexes of product:
Appearance inspection: the kit shall have complete components, and
the package appearance shall be clean without leakage and damage;
Signs and labels shall be legible.
Attention:
1. Please read this manual carefully before the experiment
2. It is not applicable to the detection of samples containing
guanidine salt and other inactivated preservation solutions.
3. The collected samples must be fresh and tested in time to
improve the detection rate and sensitivity.
4. The samples added with releasing agent shall be tested in time
and placed at 4 ℃ for no more than 1h.
Symbols:
| Symbols | Meanings |
 | In Vitro Diagnostic Medical Device |
 | Use By |
 | Temperature Limitation |
 | Lot Number |
 | Authorized representative in the European Community |
 | Date of Manufacture |
 | Caution |
 | Manufacturer |
 | Number of Tests |
Operation details please check from IFU
