|
[China]
Trade Verify
Address: Putian Industrial Zone, Chumen Town,Yuhuan,Zhejiang,China
Contact name:Tim
TAI ZHOU KAKA VALVE FACTORY |
|
Verified Suppliers
|
|
|
Modern: Contemporary chrome finish. This designer angle valve stop puts a premium touch on those ugly pipe fittings for sinks, bathrooms, and toilet kitchen showers.
| No. | Part | Materials |
| 1 | Body | Brass |
| 2 | Cartridge | Brass |
| 3 | Stem | Brass |
| 4 | Seal | EPDM/cartridge |
| 5 | Seal Gasket | NBR |
| 6 | O ring | NBR |
| 7 | Thread | BSP, 1/2″x1/2″ |
| 8 | Handle Wheel | Zinc Alloy |
| 9 | Finish | Polishing and chrome plated |
what is a brass angle valve
A brass angle valve is a type of plumbing valve made from brass material and designed with an "L" shape, allowing it to be installed in tight spaces where the water supply line and the fixture or appliance are positioned at a right angle to each other. It is commonly used to control the flow of water in plumbing systems, particularly in applications where a 90-degree turn is necessary.
Here are the key features and characteristics of a brass angle valve:
Brass Construction: Brass is the primary material used to manufacture the valve body and components. Brass is chosen for its excellent corrosion resistance, durability, and ability to withstand the pressure and temperature demands of plumbing systems.
Right-Angle Design: The angle valve has a right-angle design, resembling the letter "L," with an inlet and an outlet forming a 90-degree angle. The inlet side connects to the water supply line, while the outlet side connects to the fixture or appliance.
Quarter-Turn Operation: Like most modern plumbing valves, brass angle valves operate on a quarter-turn principle. Turning the handle 90 degrees (a quarter turn) from the closed position to the open position allows water to flow through the valve.
Shut-Off Function: Brass angle valves serve as shut-off valves to control the flow of water to a specific fixture or appliance, such as sinks, toilets, washing machines, dishwashers, and other plumbing fixtures.
Emergency Shut-Off: Brass angle valves are commonly used as emergency shut-off points in case of plumbing repairs or emergencies, allowing users to quickly stop water flow to a particular fixture without affecting the rest of the plumbing system.
Various Sizes: Brass angle valves come in various sizes to accommodate different plumbing system requirements and fixture types.
Compression or Threaded Connections: Brass angle valves can come with different types of connections, such as compression fittings or threaded connections (commonly NPT - National Pipe Thread). These connections allow for easy installation without the need for soldering or welding.
Quarter-Turn Handle: Brass angle valves typically have a lever-style handle that is easy to operate, allowing users to quickly turn the valve on or off.
Versatility: Brass angle valves are widely used in residential and commercial plumbing systems due to their versatility, reliability, and durability.
Brass angle valves are essential components in plumbing systems, providing a convenient and efficient way to control the flow of water to individual fixtures or appliances. They are commonly found under sinks, behind toilets, and in various other plumbing applications where a right-angle connection is required. Brass construction ensures that the valves can withstand the demands of water supply systems and resist the effects of corrosion and wear, ensuring long-lasting performance and minimal maintenance requirements.
How to install brass angle valve
Installing a brass angle valve is a straightforward process that can be completed with a few basic tools. Here's a step-by-step guide on how to install a brass angle valve:
Tools and Materials Needed:
Step-by-Step Installation:
Shut off the Water Supply: Before beginning the installation, ensure that the water supply to the area where you'll be installing the brass angle valve is turned off. You can shut off the water at the main water supply valve or at a specific shut-off valve located closer to the installation site.
Prepare the Pipe: If you're installing the brass angle valve on an existing water supply line, clean the end of the pipe to ensure there is no debris, dirt, or old sealant. Use a towel or rag to wipe the pipe clean.
Apply Thread Sealant: To create a watertight seal, apply thread sealant to the male threads of the pipe. You can use Teflon tape or pipe dope for this purpose. Wrap the Teflon tape clockwise around the male threads, or apply a thin layer of pipe dope to the threads.
Attach the Angle Valve: Screw the brass angle valve onto the prepared pipe with the male threads. Hand-tighten the valve until snug.
Tighten the Valve: Use an adjustable wrench or pipe wrench to tighten the brass angle valve securely onto the pipe. Be cautious not to overtighten, as this could damage the valve or the pipe.
Connect the Fixture: If the other end of the brass angle valve is meant to connect to a fixture, such as a faucet or toilet, ensure that the fixture's supply line is also prepared with thread sealant.
Connect the Supply Line: If the brass angle valve does not come with a pre-attached supply line, you'll need to connect one to the valve's outlet. Use thread sealant on the valve's outlet and on the supply line's fitting before attaching them together. Hand-tighten the connection and then use a wrench to tighten it securely.
Turn on the Water Supply: Once everything is securely connected, turn on the water supply to the installation area. Check for any leaks around the valve and connections. If you notice any leaks, turn off the water supply and re-tighten the affected connections.
Test the Valve: Test the brass angle valve by turning the handle from the closed position to the open position. Ensure that water flows freely through the valve and that it shuts off completely when closed.
That's it! Your brass angle valve is now installed and ready to use. Proper installation is essential to ensure a reliable and leak-free plumbing connection. Always follow the manufacturer's guidelines and recommendations for installation to ensure optimal performance and longevity of the valve.Towel or rag
OEM Logo Polybag, Colour Boxs, Colour Master Carton
FAQ
Q: How long is your product guarantee period?
A: We have Two years guarantee and 24 hours full-time service.
Q: What is your MOQ?
A: Normal Each Items 3000pcs MOQ.
Q: Can you accept OEM,ODM?
A: we accpet OEM.
Q: How long is your delivery time?
A: 30-35 days After Confirm Order
