3 Wavelength Fda Diode Laser Hair Removal Machine 2000w 120J/Cm2

Diode laser hair removal machine introduction

Hair removal is a very successful beauty project, that is, a beauty project that can achieve the desired effect with less cost. Compared with traditional IPL hair removal, 808 semiconductor laser hair removal mainly reflects its advantages: 1. Higher comfort, because it is a single effective wavelength, so the pain is lower on the premise of ensuring the effect; 2. It can be easily removed with lighter hair color.

Specification

808 semiconductor laser is an instrument mainly used for hair removal, which can heat the hair follicle, destroy the hair follicle and achieve the purpose of permanent hair removal. At the same time of treatment, it will also produce certain side effects. The common ones are as follows: first, depigmentation, because 808 semiconductor excitation mainly heats the melanocytes in the hair follicle, which is easy to cause the destruction of melanocytes and hypopigmentation, Even local leukoplakia occurs; 2, Pigmentation, local inflammation will occur after irradiation, which is prone to post-inflammatory pigmentation; 3, Local scar, patients with special constitution are prone to local scar.

1200W Triple wave Platinum Titanium 808nm laser diode hair removal machine​ Unique advantages

1) Germany imported xenon lamp,stable performance

2) Japan imported cooling plates,high quality

3) 600w micro-channel system,good cooling effect

4) Continuously for 18 hours working

5) Stronger cooling system(large tank+fans+pure copper radiator)

6) Double water purification system

Handles advantages

1) 10 million shots warranty

2) sapphire crystal,painless hair removal

3) big spot 12*12mm, fast and effective hair removal

808 hair removal instrument is realized by using selective photothermal effect. It will not damage the surrounding normal skin, so it is relatively safe. When in use, the hand switch or foot switch can be controlled at any time. 808 hair remover can be used in season without season requirements. 1. Wipe the probe with alcohol cotton before and after operation; 2. Press the switch before turning the key switch when starting the machine; 3. Enter the first interface, wait for 5 minutes, and then press enter to enter the system;
4. Enter the system and wait for the water circulation cooling system to cool the treatment head (there is water condensation), and then operate it for the guest according to the preparation. 5. Shave first. Any part of the operation must be shaved. Leave about 1mm stubble, which is good for light absorption and good effect; 5. Apply a thin layer of gel, the size of a coin. 6. Try several rounds after adjusting the parameters to see whether the parameters are appropriate; The hair removal energy should be adjusted so that the guests feel the tingling effect is the best;
Energy (J):15-30, frequency (Hz): 1-3, water flow rate: above 1.3, water purity: 00.0, water temperature (℃): below 25, probe temperature (℃): below 5

Customer Feedback

Our product include:

Intense pulse light machine(IPL)

Elight machine,(IPL+RF)

Radio Frequency Machine(RF)

Vacuum cavitation RF slimming machine

808nm diode laser hair removal machine

HIFU  Hydra Facial machine

Slimming machine

We can also customize the machine according your detail request.

OEM/ODM are welcomed!!!
Any questions, please don't hesitate to contact us!!

Email:info@keslaser.com

wahtsapp:+8613261231868