Home Companies Hangzhou Cuberyllium Metal Technology Co.,Ltd.

C17200 Plate 140x45x1810mm Standard ASTM B194 High Strength

Hangzhou Cuberyllium Metal Technology Co.,Ltd.

Contact Us

[China] country

Trade Verify

Address: No.126 Jincheng Rd., Xindeng Industral Area,Fuyang Dist. ,Hangzhou,Zhejiang Prov.China

Contact name:Yomi

Inquir Now

Hangzhou Cuberyllium Metal Technology Co.,Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

C17200 Plate 140x45x1810mm Standard ASTM B194 High Strength

Country/Region china
City & Province hangzhou zhejiang
InquireNow

Product Details

C17200 Plate 140*45*1810mm As Per Standard ASTM B194 With High Strength

 

About Standard ASTM B194:

ASTM or American Society for Testing and Materials is an international standard developing an organisation. It develops and designs various standards which are useful and beneficial for multiple industrial applications. To improve performance and to get satisfying output in manufacturing, this organisation defines some standards. ASTM B194 is one of the standards which specifies the requirements of Copper-Beryllium alloy Plate, Sheet, Strip, And Rolled Bar.

 

Chemical Composition of C17200 CuBe2 Alloy:

Product Grade: CUBERYLLIUM ®-172(UNS. C17200)

Be: 1.8-2.0

Co+Ni: 0.2 Min

Ni+ Co+ Fe: 0.6 Max

Si: 0.20 Max

Al: 0.20 Max

Cu: Balance

Note: Copper plus additions equal 99.5% Minimum.

 

Typical Physical Properties of C17200 CuBe2 Alloy:

GradeDensity (g/cm3)Density before age hardening (g/cm3)Elastic Modulus (kg/mm2 (103))Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C)Thermal Conductivity (cal/(cm-s-°C))Melting Range (°C)
C172008.368.2513.4017 x 10-60.25870-980

 

Temper Designations of C17200 CuBe2 Plate:A(TB00)
1/4H (TD01)
1/2H (TD02)
H (TD04)
AT (TF00)

 

Our Advantages:

1, Sample order could be acceptable;

We could provide the sample as free if we have the required size in the stock, but the fligth cost should be paid by customer.

2, On-time delivery and reasonable rates are our main highlighted benefits.

Along with the ready stock, we are here to serve for urgent requirements.

3, Good quality with advance production process

The Biggest Coil weight could be reach 1200kg/Coil

We are the only one who melting by Vacuum semi-Continuous Furnace.

Surface further polishing for top clients.

 

 

Applications of C17200 CuBe2 Alloy:

ELECTRICAL:
Electrical Switch / Relay BladesFuse ClipsSwitch Parts
Relay PartsConnectorsSpring Connectors
Current-CarryingContact BridgesBelleville Washers
Navigational InstrumentsClips 
FASTENERS:
WashersFastenersLock Washers
Retaining RingsRoll PinsScrews
Bolts  
INDUSTRIAL:
PumpsSpringsElectrochemical
ShaftsNon-Sparking Safety ToolsFlexible Metal Hose
Housings for InstrumentsBearingsBushings
Valve SeatsValve StemsDiaphragms
SpringsWelding EquipmentRolling Mill Parts
Spline ShaftsPump PartsValves
Bourdon TubesWear Plates on Heavy EquipmentBellows

 

Product Photos:

 

The most important Technology of CUBERYLLIUM ®

A: Heat treatment

Heat treatment is the most important process for this alloy system. While all copper alloys are hardenable by cold working, beryllium copper is unique in being hardenable by a simple low temperature thermal treatment. It involves two basic steps. The first is called solution annealing and the second, precipitation or age hardening.

B: Solution Annealing

For the typical alloy CuBe1.9 (1.8- 2%) the alloy is heated between 720°C and 860°C. At this point the contained beryllium is essentially “dissolved” in the copper matrix (alpha phase). By rapidly quenching to room temperature this solid solution structure is retained. The material at this stage is very soft and ductile and can be readily cold worked by drawing, forming rolling, or cold heading. The solution annealing operation is part of the process at the mill and is not typically used by the customer. Temperature, time at temperature, quench rate, grain size, and hardness are all very critical parameters and are tightly controlled by ohmalloy.

C: Age Hardening

Age hardening significantly enhances the material’s strength. This reaction is generally carried out at temperatures between 260°C and 540°C depending on alloy and desired characteristics. This cycle causes the dissolved beryllium to precipitate as a beryllium rich (gamma) phase in the matrix and at the grain boundaries. It is the formation of this precipitate which causes the large increase in material strength. The level of mechanical properties attained is determined by the temperature and time at temperature. It should be recognized that beryllium copper has no room temperature aging characteristics.

Hot Products

Alloy 25 Beryllium Copper Sheet 0.1mm~200mm For Flexible Metal Hose Physical Properties: Density (g...
JIS C172 BeCu Beryllium Copper Wire TD01 TB00 For Springs,Automobile Physical Properties: Density (g...
High Quality CuBe2 Beryllium Copper Tubes TD04 TH04 For Industry Product Normal Description: Product ...
Product Normal Description: CuBe2 (CW101C, C17200) ROUND BAR Dia. 10mm 12mm 14mm 16mm 25mm 30mm With ...
Material C17200-1/2H Strip Thickness 0.4~1.0mm Width 50mm For Electrical Industry Product Normal ...
Industry Prodcut Alloy C17200 Beryllium Copper Strips/Tapes For Spring Contact Product Normal ...