|
[China]
Trade Verify
Address: No.126 Jincheng Rd., Xindeng Industral Area,Fuyang Dist. ,Hangzhou,Zhejiang Prov.China
Contact name:Yomi
Hangzhou Cuberyllium Metal Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
Highly Thermal Copper Beryllium Wires CDA 175 For Switch Parts And Relay Parts
Product Description:
Name: Highly Thermal Copper Beryllium Wires
Grade: CDA 175
Specification: Thickness 0.8mm-1mm
Surface: Bright
State: A(TB00), H(TD04), AT(TF00), HT(TH04)
Features: Good strength and hardness
Application: For Switch Parts And Relay Parts
CUBERYLLIUM® manufactures copper beryllium in several distinct compositions. These fall into two categories: alloys selected for high strength (Alloys 172,173,170) and alloys selected for high conductivity (Alloys 751,750,741). And Gost standard QBe2,QBe1.9Ti for Russia Market. Also Supply Master alloy : CuBeryllium-200; CuBeryllium-275);CuBeryllium-350 and Cuberyllium-400 to global factory.
CUBERYLLIUM ®-750 also named -C17500 (CDA 750) combine moderate yield strength, up to 960Mpa(140ksi), with electrical and thermal conductivity from 45 to 60 % of pure copper. Alloys 750 and 751 are available in wrought product forms and can be supplied fully hardened. Hardened products are identified by the temper designation AT or HT, and have good formability.
Chemical Composition of Highly Thermal Copper Beryllium Alloy CDA 175:
| CUBERYLLIUM® Brand | UNS-Number | Beryllium | Cobalt | Fe | Si | Copper |
| Cuberyllium-C750 | C17500 | 0.40-0.70 | 2.4～2.7 | <0.1 | <0.2 | Balance |
Note: Copper plus additions equal 99.5% Min.
Typical Physical Properties of Highly Thermal Copper Beryllium Alloy CDA 175:
| Density | 8.83 | g/cm3 |
| Density before age hardening | 8.75 | g/cm3 |
| Melting Range | 1000~1070 | ℃ |
| Elastic Modulus | 14.1 | (kg/mm2 (103) |
| Thermal Expansion Coefficient | 18 x 10 -6 | 20 °C to 200 °C m/m/°C |
| Thermal Conductivity | 0.48 | cal/(cm-s-°C) |
Mechanical and Electrical Properties of Highly Thermal Copper Beryllium Wires CDA 175 :
| Temper(*) | Heat Treatment | Tensile Strength Mpa | Elongation Percent (Min) | Electrical Conductivity Percent IACS |
|---|---|---|---|---|
| A(TB00) | / | 240~380 | 20~60 | 20~30 |
| H(TD04) | / | 440~550 | 2~20 | 20~30 |
| AT(TF00) | 3 hr 490℃ | 690~900 | ＞10 | 45~60 |
| HT(TH04 | 2 hr 490 ℃ | 750~960 | ＞10 | 48~60 |
Related Material Specifications of Highly Thermal Copper Beryllium Alloy CDA 175:
Wires: ASTM B441
Rods/Bars/Tubes: ASTM B441, SAE J461, 463; RWMA Class 3
Strips: ASTM B534
Sheets: ASTM B534
Plates: ASTM B534, SAE J461, RWMA Class 3
European Standards: CuCo2Be, CuCoBe, UNS. C17500, Alloy 10, DIN 2.1285, CW104C to EN
Note:
ASTM: American Society for Testing and Materials
SAE: Society of Automotive Engineers
AMS: Aerospace Materials Specification(Published by SEA)
RWMA: Resistance Welder Manufacturers' Association
Note: Unless otherwise specified, material will be produced by ASTM.
Typical Uses For Switch Parts and Relay Parts:
| Product Category | Product | Reason Category | Reason |
| Electrical | Switch Parts | Conductivity (Electrical) | Electrical Conductivity |
| Switch Parts | Corrosion Resistance | Corrosion Resistance | |
| Switch Parts | Creep Properties | Creep Resistant | |
| Switch Parts | Mechanical Properties | High Strength | |
| Switch Parts | Softening Resistance | Resistance to Thermal Softening | |
| Switch Parts | Solderability | Solderability | |
| Relay Parts | Conductivity (Electrical) | Electrical Conductivity | |
| Relay Parts | Corrosion Resistance | Corrosion Resistance | |
| Relay Parts | Creep Properties | Creep Resistant | |
| Relay Parts | Mechanical Properties | High Strength | |
| Relay Parts | Softening Resistance | Resistance to Thermal Softening | |
| Relay Parts | Solderability | Solderability |
Product Photo:
Weldability
Soldering, brazing, gas shielded arc welding, coated metal arc welding, spot welding, seam welding and butt welding are all recommended
Hot & Cold Workability
Good hot working properties. Excellent cold working properties.
Key Technology of Beryllium Copper(Heat treatment)
Age Hardening
Age hardening significantly enhances the material’s strength. This reaction is generally carried out at temperatures between 260°C and 540°C depending on alloy and desired characteristics. This cycle causes the dissolved beryllium to precipitate as a beryllium rich (gamma) phase in the matrix and at the grain boundaries. It is the formation of this precipitate which causes the large increase in material strength. The level of mechanical properties attained is determined by the temperature and time at temperature. It should be recognized that beryllium copper has no room temperature aging characteristics.
FAQ:
Q1:Could you produce Beryllium Copper strip by Mill Hardened
process.
A1:Yes, we could produce AM(TM00), 1/2HM(TM01).HM(TM04) XHM(TM06)
XHMS(TM08).,we are the only factory could do harden strip in China.
Q2: What’s the advantages the Beryllium Copper of CUBERYLLIUM®.
A2: 1: The Biggest Coil weight could be reach 1200kg/Coil
2:We are the only one who melting by Vacuum semi-Continuous Furnace.
3:Surface further polishing for top clients.
Q3: Why you melting by Vacuum semi-Continuous Furnace.
A3:Could be get the Cast ingot without gas,smaller segregation,
Grain Refinement
Q4: What's the payment terms?
A4: We accept T/T, L/C, Paypal etc. It can be negotiated when the
amount is different.
