Home Companies Xinxiang jinrui machinery factory

Vertical Cleated Incline Conveyor , Variable Speed Belt Conveyor Sludge Lifting

Active Member

Contact Us

[China]

Address: No.388 Heping Road, Xinxiang City, Henan Province,China

Contact name:Emily

Xinxiang jinrui machinery factory

Vertical Cleated Incline Conveyor , Variable Speed Belt Conveyor Sludge Lifting

Country/Region	china
City & Province	xinxiang henan

Product Details

Vertical Cleated Incline Conveyor , Variable Speed Belt Conveyor Sludge Lifting

Introduction

Sludge Lifting Vertical Sidewall Enclosed Belt Conveyor With Galvanized material To solve the ordinary belt and pattern can not reach the conveyor angle; can also be based on the environment, designed to complete, independent of the conveyor system, to avoid intermittent transmission and complex transmission.are the best solution for horizontal, sloping or vertical product transport. It adopts high quality conveyor belt with corrugated sidewall and horizontal baffle. Sidewall belt conveyor is widely applied in coal and wood-chip fired power stations, underground mining (coal and ore),steel industry, ship loading and unloading, foundry plants, silo feeding industry, waste recycling, soil purification and water treatment, etc.

Advantages and Features

1. Reduced energy consumption to save money for you
2. Able to conveyor material at any angles up to 90 degree to save space for you
3. Higher conveyance capacity
4. Extremely high stability is provided in the traverse direction, good longitudinal flexibility
5. No spillage with steep angle conveying,long lifespan
6. Larger production grain sizes can be handled

Tech data

Belt width	Flange high	Diaphragm spacing	Angle of inclination
			30°		40°		50°		60°		70°		90°
mm	mm	mm	Delivery value(m3/h) speed of belt=1m/s
500	80	126	39	31		25		20		17		10
	120	252	52	40		32		26		21		-
	160	378	65	52		42		34		28		17
650	80	126	59	47		37		31		25		15
	120	252	78	60		48		39		32		-
	160	252	105	85		68		55		45		28
800	120	129	99	76		60		49		40		-
	160	252	136	110		88		72		58		36
	200	378	148	114		91		74		61		37
1200	160	252	223	180		144		117		96		59
	200	378	250	193		154		126		103		63
	240	378	342	280		224		183		149		91
	300	504	410	352		290		237		198		118
1400	200	252	299	231		185		151		123		75
	240	378	422	345		276		225		184		113
	300	348	512	440		363		296		241		148
	400	504	780	709		634		549		451		277

Selection Conditions

♦ Material to be processed: _____	♦ Max. granule size of the feeding material: _____mm
♦ Handling capacity (Ps. It means the total	♦ Percentage of Max. granule in material:_________%
material capacity feeding from the inlet): _____t/h	♦ Upstream equipment (Ps. It means what kind of
♦ Bulk Density: _____t/m3	equipment is used to feed the material): _____
♦ Material temperature: _____ºC;	♦ Downstream equipment (Ps. It means what kind of
♦ Water content:____%	equipment is used to discharge the material): _____
♦ Material is corrosive or not: ____ (Ps. Yes or No)	♦ Working power supply: _____V ______HZ
♦ Material is sticky or not: ____ (Ps. Yes or No)	♦ Please refer to the following picture and provide the
♦ Working environment is indoor or outdoor	relevant parameters:L1____m, L2___m, H___m, α____°
or indoor and outdoor: ______________	Working environment temperature: ______ ºC

Operation regulation and maintenance
1. Belt conveyor should be operated in according to design requirement.
2. Belt conveyors are not allowed to overload run.
3. Check wear condition of the belt, the damaged should be repaired.
4. Operators should circuit to inspect to close observe belt conveyor running. Especially,temperature rise and noise of main motor and the brake working whether they are normal; contact state of the brake and oil level, noise of gear unit and run off of belt should be noticed;temperature rise and noise of all bearings and state of all transition loads point should be noticed;
5. notice to see whether the hopper are blocked, working state of pulley, idler, belt cleaner, take-ups and control equipment.
6. Operators should make good record if any abnormal. The belt conveyor should be stoppe on emergency.
7. Periodic overall: Minor overall should be once every monthes besides ordinary maintenance Overhaul should be once half past year or once every year.