Home Companies Xinxiang jinrui machinery factory

Conveyor Spare Parts 30 Degree Trough Roller 133mm Diameter

Active Member

Contact Us

[China]

Address: No.388 Heping Road, Xinxiang City, Henan Province,China

Contact name:Emily

Xinxiang jinrui machinery factory

Conveyor Spare Parts 30 Degree Trough Roller 133mm Diameter

Country/Region	china
City & Province	xinxiang henan

Product Details

Conveyor Spare Parts 30 Degree Trough Roller 133mm Diameter

1. Working principle

The trough roller is driven by the friction between the conveyor belt and the roller, and the roller tube body, bearing seat, bearing outer ring and seal ring do rotational movement, and the conveyor belt and together with it to achieve the transmission of logistics.

2. Main function and scope of application

Trough roller are widely used in open-air dusty and corrosive environments, such as mines, power plants, steel plants, stone plants, cement plants, coal washing plants, salt plants, alkali plants, fertilizer plants, docks and other transportation sites Trough rollers are often used.

3.Advantages and Features

3.1. The trough roller has the characteristics of corrosion resistance: acid, alkali and salt are difficult to corrode it.
3.2. The trough roller has strong hardness: strong abrasion resistance.
3.3. Good airtightness: the trough roller is fully sealed, with plastic labyrinth seals at both ends, oil and grease will not leak, which can keep the rolling shaft for a long time; the trough roller is running in a fully sealed state.

3.4. Ceramic surface of trough roller: an oxide film is formed, the surface is smooth, does not adhere to materials, and the friction coefficient in contact with the conveyor belt is small, which reduces the driving force of the winch.
3.5. The trough roller has a long service life: the trough roller is 2-5 times longer than the steel roller, and it can reduce belt wear, the belt does not run off, and the belt service life is prolonged.
3.6. Low operating cost: trough rollers can reduce the overall cost of belt conveyors and reduce maintenance man-hours.

4. Packing Details:

4.1, Outer packing is plywood case, which is up to the international standards.

4.2, Inner packing is Moisture-proof and water-proof membrane.

4.3, All of package are wrapped by 0.5mm steel belt to further strengthen.

5. Maintenance and repair

5.1 under normal conditions, the conveyor is required to start without load and avoid short-time starting.

5.2 it is necessary to check whether there is oil leakage in the reducer regularly, and whether the regular oil filling volume is in conformity with the construction in time

Correct and supplement.

5.3 if there is squeal at the driving drum, it means that the belt is slipping. Check whether the belt is tensioned.

5.4 the belt joint shall be inspected frequently, and the damaged parts shall be cut and redone in time, and the damaged parts shall be protected during redoing

6.Tech data

Belt width(mm)	Roller		Bearing NO.
800	D	L	Bearing NO.
1000	89	315	204,205
1200	108	380	204,205,305
1400	133	465	205,305,206,306
1600	133	530	205,305,206,306
1800	159	600	205,306,307,308,309
2000	159	670	207,309,308
2200	194	800	207,307,308,309
2400	194	900	206,307,308,309