|
[China]
Trade Verify
Address: No.1 North Road, Dongtumen, Jinhaihu Town, Pinggu District, Beijing, China
Contact name:Zoe Bao
Beijing Jinshengxin Testing Machine Co., Ltd. |
|
Verified Suppliers
|
|
|
Factory Price Dynamic Pendulum Impact Tester Charpy Impact Testing
Machine For Plastic PVC Pipe
Ⅰ. Use:
It can be used to determine the impact strength of thermoplastic
pipes for fluid delivery. Suitable for homopolymeric and co-poly
polypropylene (PP-H,PP-B,PP-R) tubes, unplastic PVC (PVC-U) tubes,
modified high impulse resistant PVC (PVC-Hi) tubes, modified
polyvinyl chloride (PVC-C) tubes, acrylonitrile-butadiene-styrene
and acrylonitrile-styrene-acrylic (ABS, ASA) tubes.
Ⅱ. Principle:
A small section of pipe or machined gap-free strip specimen was
preprocessed at the specified test temperature.The sample is then
supported in the horizontal direction, with a quick impact at the
support line with a swing hammer with a given impact energy.After
an impact on the specified number of samples, the test results are
identified as the percentage of the number of sample damages
against the total number of samples tested.
Ⅲ. Technical Parameters
| Model | XJJ-50J |
| Impact speed | 3.8m/s |
| Impact energy | 15J, 50J |
| Pendulum moment | Pd15=7.733Nm, Pd50=25.777Nm |
| Rising angle | 160° |
| Impact blade angle | 30°±1° |
| End arc radius | (2±0.5)mm |
| Distance between centers of pendulum and specimen | 380mm |
| Grip round edge radius | (1 ± 0.1)mm |
| Impact blade corner dimensions | (30 ± 1)° |
| Impact blade round edge radius | (2 ± 0.5)mm |
| Display | The dial shows |
| Standards | ISO9854,ISO180,GB/T1043,JB/T8761 |
Ⅳ. Configuration List
| No | Item | Quantity |
| 1 | Main frame | 1 set |
| 2 | 15J pendulum weight | 1 set |
| 3 | 50J pendulum weight | 1 set |
| 4 | Centering plate(span 40,70) | 2 sets |
| 5 | Inner hexagon spanner(s=5,8) | Each 1 set |
| 9 | Operation manual | 1 set |
| 10 | Warranty card | 1 set |
| 11 | Packing list | 1 set |
