ISO3127 ISO4422 Plastic Pipe Falling Dropping Hammer Impact Testing
Machine Tester
Summary:
This testing machine is widely used for the external loads impact
strength test of plastic pipes, plastic board and non-metal
materials. Test pieces are subject to blow from a falling striker,
of specified mass and shape, dropped from a known height onto
specified position around the circumference of the test piece. The
true impact rate of the batch, or production run from an extruder
is estimated.
The maximum value acceptable for the TIR is taken to be 10%.
It is an ideal instrument for quality inspection in construction
industry, manufacturing unit, chemical industry, universities and
so on.
Complies standards:
GB / T14152, GB / T10002.1, GB / T5836.1, GB / T13664, GB / T16800,
ASTM D2444, ISO4422, ISO3127, BSEN1411 and BSEN744.
The characteristics of the equipment:
- Three-level protection:
- First-level sample cabin door safety protection;
- Second level observation window door security protection
(temporarily not added);
- Third level up and down limit safety protection.
- Fast lift:
- The use of high-torque stepper motor, the rise rate can reach
250mm/sec, from zero to 2 meters at the fastest 8 seconds can be
achieved.
- Intelligent hover:
- The machine adopts multi-stage rate control program to ensure that
the hammer stops smoothly and the control position has no
deviation.
- Exhaust pipe modeling:
- Drop hammer The hammer pipe adopts 3D modeling to increase the
exhaust hole and minimize the wind resistance. At the same time,
the holding structure of the pipe is increased to prevent the
failure and deformation of the pipe.
- Pneumatic catch hammer pneumatic release hammer:
- Abandon the traditional sense of the electromagnetic hammer and the
electromagnet hammer, using the pneumatic structure with greater
force value, the hammer adopts 300N long-stroke double cylinder,
using the hammer surface of the beef tendon plate, the hammer is
stable, and no injury; the hammer also adopts the pneumatic
structure, which fundamentally solves the cable bending wire and
leakage phenomenon. Pneumatic adopts pneumatic automatic locking
structure, safe and reliable.
- Integrated, modular assembly:
- The mechanical part adopts the standard aluminum alloy profile
assembly structure, and the electrical part adopts the 7-inch touch
screen and Delta PLC, which realizes the characteristics of process
standardization, modular installation, light structure and high
strength.
- Distinguished quality:
- All the devices used adopt imported devices, cylinder adopts Adker
brand, touch screen adopts Delta brand, PLC adopts Delta brand, and
power supply adopts Taiwan Mingwei brand. All electrical,
mechanical and software parts have safety precautions. Such as
anti-leakage, anti-short circuit, anti-static, anti-interference,
anti-leakage, anti-power failure, anti-misoperation and so on.
- High degree of automation:
- This instrument can automatically grasp the zero point, automatic
hammer, automatic hammer, automatic test.
Technical parameters:
Model | XJL-450M |
Ambient temperature | 10℃-35℃ |
Drop hammer quality | 0.5kg-5kg |
Hammer diameter | D25mm,D90mm(can customized) |
Height of the fall | 50mm-2000mm,error≤±2mm |
Diameter of the sample | Φ10mm-Φ450mm(can customized) |
Deviation of impact center from fixture center | ≤2mm |
V-type supporting | 120° |
source | 220VAC±10% |
Outline dimension | 730mm×700mm×3650mm |
Net weight | 300kg |
Configuration list:
Name | Quantity |
Host | One set |
Electric cabinet | One set |
The hammer body | One set |
Power line | One piece |
V-type supporting | Two pieces |
Operating tool(wrench) | One set |
![](http://img.everychina.com/nimg/f7/68/eec6bc925efc7a941b43c590528f.jpg)
![](http://img.everychina.com/nimg/35/3e/23ffc8a9f779aa2de0b347f1e936.jpg)
![](http://img.everychina.com/nimg/da/0c/607ab872c3d15c0042ed43f09817.jpg)