Active Member
|
[China]
Address: 7th floor, building a, Yingbo Industrial Park, Longhua District, Shenzhen
Contact name:wulin
Shenzhen Bochuang shikong Communication Technology Co., Ltd. |
|
|
Trolley case style mobile phone signal jammer, Signal Jammer 8pcs omni-directional antenna mobile phone UAV jammer
Product Features:
Product Specification:
| Channel | Working Frequency | Output Power(±3dBm) |
| CH1 | 20-100 MHz | 44.77dBm |
| CH2 | 100-300MHz | 44.77dBm |
| CH3 | 300-500MHz | 47dBm |
| CH4 | 800-1000MHz | 47dBm |
| CH5 | 1520- 1670 MHz | 48.75dBm |
| CH6 | 1800-2000 MHz | 48.75dBm |
| CH7 | 2000-2200 MHz | 48.75dBm |
| CH8 | 2400-2690 MHz | 48.75dBm |
| Power: AC 220V | ||
| Power Consumption : 1000W | ||
| Mainframe weight: 53.6Kg Size(L×W×H):800×500×310 mm | ||
| Humidity: 5%-95% Running Temperature: -35 to +80 ℃ | ||
Product Details:
1. System accessory table
| No | Name | Qty | Unit | Remark |
| 1 | Antenna | 8 | pcs | Omnidirectional |
| 2 | Wire controller | 1 | pcs | |
| 3 | Line controller control line | 1 | pcs | Standard |
| 4 | Spare Line controller control line | 1 | pcs | 20M |
| 5 | Power Line | 1 | pcs | Standard |
| 6 | Hand-pull Box | 1 | pcs | System Accessary |
| Input impedence | 50Ω |
| standing wave | ≤1.8 |
| Gain | 3dBi |
| Power Capacity | 150W |
| Direction of Polarization | Vertical Polarization |
| Cross Modulation | <-107dBm |
| Interface Type | 7/16 or N-K |
| Lightning Protection | Direct Grounding |
| Wind Protectionnn | 60(m/s) |
| Pole Diameter | Φ25/40(mm) |
Step 2 - Connecting antenna
Step 3 - Start Jammer
1) Connection wire controller
The 6pin wire control connection line is connected to the 6pin wire
control connection
port on the side of the chassis;
2) Control the output and output power of the power amplifier with
a wire controller.
[ALL Ch]: screen all 4Channel on / off buttons;
[ALL PA]: power output adjustment keys for all 4Channel of the
shield;
[CHX]: the output of Channel X is the Channel number of 1 ~ 8 when
the output of
Channel X is turned on / off alone;
[PAX]: regulating the power output of ChannelX alone X is the
Channel number of 1 / 8.
The output power regulation is divided into five sections: 20: 20
and 40.
Step 4 - Turn off the Jammer
1) Dial the red knob switch on the side of the chassis to "0";
2) Unplug the power cord;
Bochuang spatiotemporal signal shield reminder: precautions for
outdoor signal shield
1. The antenna must be installed according to the corresponding
identification on the host before connecting the host.
2. The effective coverage of the shield is a circular area centered
on the shield. Therefore, pay attention to correctly selecting the
placement position of Bochuang space-time shield to avoid shielding
dead angle; If it is a directional antenna, the alignment direction
can be adjusted according to the standard sector angle of the
antenna.
3. The shield shall be placed in a well ventilated place to avoid
the shielding of large objects and strong electric and magnetic
sources of strong heat sources, so as to ensure the shielding
effect and stable operation for a long time.
4. When the shield works, it is not allowed to stack other articles
and disassemble the antenna on it, so as not to affect the
shielding effect and damage the machine.
5. When the shield is not in use, the power supply shall be cut off
in time to avoid affecting the normal use of the mobile phone.
6. When using the shield outdoors, pay attention to dust prevention
and waterproof. Please keep away from corrosive gases and liquids,
and do a good job in dust and moisture prevention, so as not to
accelerate the aging of internal components of the equipment
7. When the used site area is larger than the effective shielding
range, it is recommended to use multiple shields for honeycomb
installation to ensure the shielding effect.
8. Since the power supply and antenna are specially matched with
the host and are debugged one by one during factory debugging,
please try not to use them interchangeably to ensure good results..
