Xinxiang Hundred Percent Electrical and Mechanical Co.,Ltd |
Verified Suppliers
|
|
BEFANABY develops and produces handling equipment, not only can
customize standard electric transport carts, but also customize
non-standard electric transport carts for handling various molds.
The steel shop floor rail trolley is a rail-type
transportation vehicle, which needs to lay a rail on the
ground. The rail is generally an I-shaped surface contacting the
rails; secondly, it is an electric drive trolley, which runs
automatically under the drive of a motor reducer. This kind of
transport trolley has a flat surface without a cover, and sometimes
it can be non-planar but without a cover. The cart body has no
steering wheel, only forward and backward directions (even if it
turns, it will turn on the track). This kind of vehicle has the
characteristics of simple structure, convenient use, large carrying
capacity, no fear of being dirty or smashed, easy to maintain, and
long-term use. A means of transport that frequently carries heavy
loads over short distances.
Maintenance Attention
1. The air duct of the motor must be unobstructed, and no heat
source can be placed around the motor, and preventive measures
should be taken in time when problems are found.
2. Under normal conditions, change the grease every six months.
When replacing the grease, first wash the bearing with kerosene or
gasoline, and then fill two-thirds of the bearing chamber with
grease, too much or too little is not good for lubrication.
3. The motor should be inspected regularly, usually a minor
inspection every three months, and an overhaul once a year. If the
motor winding is burned out due to an accident, it should be
disassembled in time to analyze the cause. Usually, the auxiliary
winding is burned out due to the failure of starting switching or
the capacitor is short-circuited; the main winding is burned out
due to long-term overload or stalled starting. Replace the motor
winding and remove the cause of the accident before it can be
reused.
4. During the use of the electric rail trolley, it is necessary to
regularly check the technical status of each component, clean up
the dust, water, oil and iron filings that may enter the body in
time, and do a good job in the daily maintenance of the electric
rail trolley.
Model | KPX-10t | KPX-16t | KPX-25t | KPX-30t | KPX-40t | KPX-50t | KPX-63t | KPX-80t | KPX-100t | KPX-150t | |
Rated Load | 10 | 16 | 25 | 30 | 40 | 50 | 63 | 80 | 100 | 150 | |
Table size | Length(L) | 3600 | 4000 | 4500 | 4500 | 5000 | 5500 | 5600 | 6000 | 6500 | 10000 |
Width(W) | 2000 | 2000 | 2200 | 2200 | 2500 | 2500 | 2500 | 2600 | 2800 | 3000 | |
Height(H) | 500 | 550 | 600 | 600 | 650 | 650 | 700 | 800 | 900 | 1200 | |
Wheel Base | 2600 | 2800 | 3200 | 3200 | 3800 | 4200 | 4300 | 4700 | 4900 | 7000 | |
Rail Inner Gauage | 1435 | 1435 | 1435 | 1435 | 1435 | 1435 | 1435 | 1800 | 2000 | 2000 | |
Wheel Diameter | 300 | 350 | 400 | 400 | 500 | 500 | 600 | 600 | 600 | 600 | |
Wheel Quantity | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 8 | |
Ground Clearance | 50 | 50 | 50 | 50 | 50 | 50 | 75 | 75 | 75 | 75 | |
Running Speed | 25 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 20 | 18 | |
Motor Power | 2 | 2.2 | 3.5 | 4 | 5 | 6.3 | 8 | 10 | 15 | 15 | |
Battery Capacity | 160 | 180 | 250 | 250 | 300 | 330 | 400 | 400 | 440 | 600 | |
Battery Voltage | 48 | 48 | 48 | 48 | 48 | 48 | 48 | 72 | 72 | 72 | |
Max Wheel Load | 42.6 | 64.5 | 94.5 | 110.4 | 142.8 | 174 | 221.4 | 278.4 | 343.8 | 265.2 | |
Reference Weight | 4.2 | 5.5 | 6.5 | 6.8 | 7.6 | 8 | 10.8 | 12.8 | 14.6 | 26.8 |
All can be customized as per customers’ requirement.And BEFANBY business is meeting your business need, hope our professional team can help you well with rich experience.
battery powered transfer cart rail power supply trolley line motorized rail cart cable power supply