|
[China]
Trade Verify
Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Contact name:Lynette Wong
KingPo Technology Development Limited |
|
Verified Suppliers
|
|
|
IEC 60598-1-clause 4.12.5 glands testing , Test rods , Screws and connections and glands testing
Standard: IEC 60884-1 2013 clause 24.6, IEC 60598-1 clause 4.12.5
Application: This device is use for test the torque resistance strength of screwed gland of lamps and similar appliances.
Test sample: Screwed gland of lamps and similar appliances.
Feature: Floor type support, lifting weights mechanism drive turntable to achieve torque test.
Parameters:
| Diameter of test rod(mm) | Metal glands(N.m) | Glands of moulded material(N.m) |
| <7 | 6.25 | 2.5 |
| 7~14 | 6.25 | 3.75 |
| 14~20 | 7.5 | 5 |
| >20 | 10 | 7.5 |
TESTING AND MEASURING EQUIPMENT/ALLOWED SUBCONTRACTING IEC
60598-1:2014, A1:2017 Edition 8.1
Luminaires – Part 1: General requirements and tests
| Clause | Measurement/testing | Testing / measuring equipment / material needed | Equipment Classification |
| 3.4 | Test of marking | Piece of cloth / Water / Petroleum spirit | R |
| 4.4.4 | Lampholder pressure test | Test caps / Pressure device / Torque driver | R |
| 4.4.5 | Voltage across lampholders | High voltage probe / Oscilloscope | R |
| 4.11.6 | Electro-mechanical contact system | Low voltage variable current power supply, voltmeter, high voltage transformer | R |
| 4.12.1 / 4.12.5 | Screws and connections (mechanical) and glands testing | Test screwdriver or spanner / Test rods | R |
| 4.13.1/4.13.4 4.13.6/4.21.4 |
Mechanical strength tests | Spring-operated impact test apparatus / Apparatus for ball impact tests Conditioning cabinet (e.g. freezer) / Angle measuring device / Weighting device / Tumbling barrel test equipment |
R |
4.14.1/4.14.2 4.14.3 | Adjusting devices testing | Glass test shelves / Weighting device / Test apparatus for adjustable devices | R |
| 4.9.2/4.18.1 | Insulating linings and sleeves tests / Resistance to corrosion | Heating cabinet, humidity cabinet, megaohmeter, high voltage transformer | R |
| 4.18.2/Annex F | Stress corrosion | Closeable glass vessel / test solution / Heating cabinet / Facilities to wash samples after test | R |
| 4.20 | Rough service luminaires | Vibration test equipment | S |
| 4.22 | Attachment to lamps | Weighing device | R |
4.24/Annex P |
Photobiological hazard: UV radiation, retinal blue light hazard |
| S
S |
| 4.26 | Short circuit protection test | Test chain / Weighting device | R |
| 4.28 | Fixing of thermal sensing controls | Temperature change test instruments in accordance to IEC 60068-2-14, test Na | S |
| 5.2.10.1 | Pull and torque tests on cord anchorage | Cord anchorage tests apparatus (pull and torque) | R |
| 5.3 | Internal wiring dimensions | Micrometer / Equipment for insulation thickness | R |
| 5.4 | Test of conductors having a reduced cross-sectional area | Thermometer / Thermocouples / Ammeter / Adjustable resistive load | R |
| 7.2.3 | Earth continuity test | Earthing test equipment | R |
8.2.5 8.2.7 | Protection against electric shock tests / Capacitor discharge | Standard test finger (IEC 60529) / Unjointed test finger Voltmeter / oscilloscope | R
|
| 9.2.0 | Solid object proof luminaire testing | IP 3X (2,5 mm) / IP 4X (1 mm) probes | R |
| 9.2.1 / 9.2.2 | Dust proof luminaire tests | Apparatus for proving protection against dust | R |
| 9.2.3,4,5,6,7, 8,9 | Water proof luminaires testing | Apparatus for protection against water tests | R |
| 9.3.1 | Humidity tests | Humidity cabinet | R |
| 10.2.1 | Insulation resistance tests | Megaohmmeter | R |
| 10.2.2 | Electric strength tests | High voltage transformer | R |
| 10.3.1 | Leakage current testing | Leakage current tester | R |
| 11.2.1 | Creepage distances and clearances measurements | Digital calliper (or equivalent) / Oscilloscope | R |
| 12.3.1 | Endurance tests | Thermal cabinet (35°C) / Endurance test equipment / Multimeter / Wattmeter | R |
12.4.1 |
Thermal tests | Draught-proof enclosure (25°C) or alternative chamber/room / Thermometer / Thermocouples / Voltage stabilizer / Multimeter / Wattmeter |
R |
12.5.1e) Annex C Fig. C3 |
Abnormal operation testing |
Test circuit for metal halide luminaires |
R |
12.7.2 | Test for luminaires with temperature sensing controls internal/external to the ballast or transformer | Relevant equipment of clauses 15.3 and 20.6, Equipment List of IEC 61558-1:2005 |
R |
| 13.2.1 | Resistance to heat test | Heating cabinet / Ball pressure test apparatus (see also CTL DSH 391 D) | R |
| 13.3.1 | Resistance to flame test | Needle flame test apparatus | R |
| 13.3.2 | Resistance to ignition testing | Glow-wire test apparatus | R |
| 13.4.1 | Resistance to tracking test | Proof tracking test device | R |
| 14 | Screw terminals | Torque drivers, test cables, pull device, micrometer, timer | R |
| 15 | Screwless terminals | Pull device, variable current source, voltmeter, heating cabinet, timer, test cables | R |
