|
[China]
Trade Verify
Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Contact name:Lynette Wong
KingPo Technology Development Limited |
|
Verified Suppliers
|
|
|
Sand and dust test chambers are made for the simulation of dust and sand conditions.These test chambersare used for evaluating the effects of dust-filled environments in order to validate product seal integrity. Dust chambers are utlized in automotive, Electro-technical products, Materiel, Coatings, Solar energy, etc.
Main technical parameters
| Model | K-800 | KP-X1000 | KP-X1500 | KP-X2000 |
| Internal dimensions(mm) | 800*1000*1000 | 1000*1000*1000 | 1000*1500*1000 | 1000*2000*1000 |
| Overall dimensions(mm) | 1040*1450*1960 | 1200*1450*1960 | 1250*1900*1960 | 1300*2400*1960 |
| Temperature range | Ambient to+50°C | |||
| Relative Humidity | <30%RH | |||
| Normal wire diameter | 50um | |||
| Normal width of a gap between wire | 75um | |||
| The talcum powder amount | 2kg~4kg/m3 | |||
| Fight time | 0~99h59m | |||
| Fan cycle time | 0~99h59m | |||
| Specimen power outlet | Dust-proof socket AC220V 16A |
| Controller | 5.7'' programmable color display touch scrren controller |
| Vaccum system | Equipped with a pressure gauga,air filter,pressure regulater,connecting tube |
| Circulating fan | Enclosed alloy low-noise motor,multi-vane centrifugal fan |
| Heating system | Independent Nichrome electronic heating system |
| Powersupply | 380V50HZ |
| Safety devices | Electric leakage, short circuit,over-temperature,motor overheating over current protection/Power failure memory function for controller |
| Standard | IEC 60529,ISO20653 |
Standard features
♦Temperature control and display unit
♦Humidity control and display unit
♦French TECUMSEH compressor cooling unit
♦Environment friendly refrigerant R404A & R23
♦Humidification system with external isolation, stainless steel surface evaporation humidifier
♦Heating element is Nichrome heater
♦Circulation with low noise centrifugal wind fan
♦Temperature sensor PT-100, Resolution: ± 0.001 ℃
♦Humidity sensor dry and wet bulb sensor, Resolution: ± 1%
♦Build- in water reservoir
♦Programmable color LCD touch screen controller
♦Viewing window with interior lighting
♦Test hole with silicone screw plug.
♦2 pieces of adjustable and removable mesh shelving.
♦Bottom install 4 castors for ease moving, andwith brakes function
♦R-232 (R-485) interface, PC Link, communication with LAN network interface
♦Programs reach to 999 groups and 999 sections
♦Safety protection system
♦Interior material is high quality SUS304 stainless steel
♦Exterior material is steel plate with protective coating
♦Thermal insulation is Polyurethane foam
♦Automatic water supply, water purification system
♦Silicon seal for door
♦Can perform long time 85 °C/85 % RH tests
♦380V, 50Hz +/- 10%, three-phase-five-wire system
♦Standard and features
