|
[China]
Trade Verify
Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK
Contact name:Lynette Wong
KingPo Technology Development Limited |
|
Verified Suppliers
|
|
|
IEC60884 figure 20 Six Workstation Flexible Cable Cord Retention Force Test Apparatus
Product details:
This is a customzied 6 workstations flexible cable cord retention test apparatus.It well meets our customer's special testing requirements.
The cord retention test apparatus is designed and manufactured according to the standard requirement of IEC60884 figure 20. It is used to test cord retention and check the effectiveness of the retention of the cable and cord anchorage.
Technical parameters:
| Power Supply | 220V 50Hz or 110V 60Hz |
| Test times | 1~9999, adjustable. 100 is by default. |
| Test rate | 60 times/min |
| Weight | 10N*1, 60N*1, 20N*2 |
| Standard | IEC60884 Figure 20, VDE0620 |
Test method:
The cord anchorage is used in the normal way, clamping screws, if
any, being tightened with a torque equal to two-thirds of that
specified in standard. After reassembly of the specimen, the
component parts shall fit snugly and it shall not be possible to
push the flexible cable into the specimen to any appreciable
extent. The specimen is placed in the test apparatus so that the
axis of the flexible cable is vertical where it enters the
specimen.
Corresponding tensile force of the flexible cable:
| rated current of the flexible cable(A) | rated voltage of the flexible | tensile force |
| 2.5 | — | 50 |
| 2.5～16 | <250 | 60 |
| 2.5～16 | >250 | 80 |
| >16 | — | 100 |
