Home Companies KingPo Technology Development Limited

Power Driven Light Testing Equipment Flexible Lighting Cord Winding Tester

KingPo Technology Development Limited

Contact Us

[China] country

Trade Verify

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Contact name:Lynette Wong

Inquir Now

KingPo Technology Development Limited

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Power Driven Light Testing Equipment Flexible Lighting Cord Winding Tester

Country/Region china
City & Province hong kong hong kong
Categories Counters
InquireNow

Product Details

 

Flexible Lighting Cord Winding Tester

 

Device Briefing:

 

Flexible Lighting Cord Winding Tester meets requirements of Chapter 6.14 and Fig.3 of IEC60598-2-20:2002,GB7000.9-2008 standard;used for checking whether lighting string has enough mechanical strength.

 

Technical Parameters:

 

Repeat each of the following test 45 times for inspection on rigid lighting string’s qualification:

a ) 60N pulling force acting on the bottom of the pipe not all of a sudden for 1 min.

b ) 0.15N·m torque,acting on the bottom of the pipe at the most disadvantageous direction(optionally when questioned ) not all of a sudden for 1 min; (used with torsion device)

Soft lighting string’s qualification checki needs to have the following additional test after step a ) and b )

Test:act on 60N pulling force;wind the soft pipe onto a cylinder at a diameter of 250mm.Winding times and environmental temperature depend on:

 

— IP20 lighting string:25℃±5℃ ;10 times

— more than IP20 lighting string: 25℃±5℃ ;10 times

Then repeat 10 times ranging-15℃±5℃

Device material:molding Aluminum;

Wooden cylinder:Ø250mm;

Weight:one,60N;

method:power-driven;

Trial number:1-99999times;can be preset.

Hot Products

Items Model Description Standard E27 Lamp cap gauge 7006-27B-1 go gauge for E27 caps on finished ...
Items Model Description Standard E26 Lamp cap gauge 7006-29D-1 gauge with reference diameter of 10...
Items Model Description Standard E26 Lamp cap gauge 7006-29C-2 gauge with reference diameter of 13...
Items Model Description Standard E26 Lamp cap gauge 7006-29B-2 gauge with reference diameter of 23mm ...
Detailed Information IEC60061-3 1 G13 lamp series Pass rule|7006-45-4 Pass check gauge|7006-44-4 2 ...
Items Model Description Standard E12 lamp cap gauge 7006-27H-1 go gauge for caps on finished lamps ...