|
[China]
Trade Verify
Address: Zone A, Floor 3, Building 1, Houhai Xufa Science and Technology Park, No.8, Zhenxing Road, Loucun, Xinhu Community, Guangming New District, Shenzhen, Guangdong, China
Contact name:Naomi Zhang
Shenzhen Chebao Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Transistor Battery Tab Spot Welding Machine 18650/21700 Battery Pack
● CHEEBO lithium battery spot welding machine adopts self-developed precision welding head and precise pressure adjustment and control.
● CBLQ-5A battery nickel welding machine does not need welding
transformer, small size, light weight, beautiful.
● It can be used for bump spot welding and needle spot welding.
● 18650 Battery spot welder has three control modes: constant
current, constant voltage, constant current and constant voltage
combination mode.
● Built-in pre-inspection function, which can be used to judge
whether the workpiece is electrified before welding.
● The welding current of lithium battery spot welder can be switched
quickly and effectively by transistor without transformer.
● The welding power supply is controlled by switch mode, which can
realize small and efficient welding and high output.
● The welding current of the power source rises quickly, and the
high quality welding can be realized in a short time.
● The spot welding machine of lithium ion battery group increases
the function of connection point and effectively improves the
production efficiency.
● Independent research and development of precision welding head,
precise pressure adjustment control.
● Controlled by microcomputer technology, it can dynamically monitor
the waveforms of welding current, voltage, power and resistance in
real time.
● 5.7inch HD LED display screen, convenient and intuitive adjustment
of equipment parameters, and can store multiple programs in
advance.
● There are three kinds of welding methods: constant voltage,
constant current and constant voltage current combination.
Power lithium-ion battery module welding, 3C lithium-ion battery pack welding, Ni-MH battery pack welding, hardware welding, electronic and
electrical parts welding, wire terminal welding, stainless steel parts welding, metal jewelry welding, copper products welding, aluminum products
welding. It is also suitable for product maintenance and proofing.
| Welding thickness | 0.02-0.5MM | Welding power supply | Transistor |
| Welding mode | Single side double point horizontal welding | Table top and weld head height | 250 (Maximum pitch adjustable) |
| Supply current | 5000A/8000A/10000A | Welding speed | 200P/M |
| Spot welding method | Bump welding/tip welding | Welding pressure | 5KG/F |
| Maximum voltage | 30V(Adjustable by oneself) | Equipment size | 600*900*1300MM |
| Driving mode | Pneumatic | Machine Weight | 60KG |
| Power source specification | Single-phase 220V50/60HZ | Application scenarios | Battery welding |
1. Transistor power supply
The welding current rises very fast, achieving high quality welding in a short time. The waveform of welding current, voltage and resistance is dynamically and real-time detected. Built-in pre-check function, welding work can be judged before welding power.
2. Precision resistance welding head
Horizontal welding structure, double linear guide design left and
right pressure can be adjusted according to the welding thickness.
Built-in pressure sensor, precise control to apply stable pressure.
3. Thickened tempered glass
High quality explosion-proof glass is used to effectively prevent
the damage caused to the desktop during welding. At the same time,
it can increase the fluency of welding and increase the welding
efficiency.
Power on -- check whether the WELED switch is turned on -- place the product to be welded on the desktop -- Step on the foot pedal -- push down
the welding head -- spot welding completed -- return the welding head
Q: I don't know which one is right for me?
A: Please tell us the following information
1) Battery model and type.
2) Welding material and welding thickness
3) Commercial industry: We have a lot of sales experience and can provide you with advice.
Q: How do I install and run the machine?
A: Our technicians had installed the machine before shipment. For the installation of some widgets, we will send out detailed training videos and user manuals randomly. 95% of customers can teach themselves.
Q: What's your minimum order quantity?
A: We don't have a minimum order quantity. Whether it is an order of 1 or 100, we will wholeheartedly support you.
Q: How does your factory do in terms of quality control?
A: Quality comes first. More than 20 tests will be performed on each unit. After all the tests are passed, our QC will test the welding performance.
Q: How can I do if the machine goes wrong?
A: If you encounter such problems, please contact us as soon as possible. Do not try to repair the machine by yourself or others. We will respond as soon as possible within 24 hours to solve your problem.
