Active Member
|
[China]
Address: 15/F, Tower 3, Excellence City, No.128, Zhongkang Rd., Shenzhen, CHINA 518049
Contact name:Neware Support Team
Neware Technology Limited |
|
|
Programmable Battery Test Chamber Neware Temperature and Humidity Environmental Box
Aim to battery test , Neware testing software can control the battery tester and temperature chamber at the same time , in order to test best battery performance.
Different run program can be set according to different test process of battery performance . Then the battery tester and chamber will run automatic by setting. Reduce the human operation .
The chambers build - in sensor will trigger an automatic alarm when it detects abormal conditions . The chamber will protect and shutdown , then send the alarm information to the assigned terminal .
Independent development the temperature control module in the electronic control system by Neware . Improve the control accuracy of temperature .
Neware environmental test chamber - also knows as high and low temperature box , high temperature box , incubator and explosion proof box - is researched and produced by Neware for battery testing in new energy industry , which can provide the required high temperature , low temperature and constant temperature environment for battery charge , discharge and safety performance testing , and it can simulate climate environment for researchers to do tests in lab . Neware environmental test chamber is also a reliable equipment for all companies such as electronics , electricians , instruments , materials and semiconductor , as well as for departments such as schools , medicine , chemical , environmental protection , agriculture , livestock and aquatic products , etc .
High Low Temperature Humidity Test Chamber
Temperature humidity Test Chamber aims to test battery performance under high low temperature by simulating harsh climate condition . it can analyze and evaluate whether the battery can meet required international standard and provides a good reference in product research and development stage , it’s widely applied on Electronics , Telecommunication , Automobile , Packaging , Aerospace , Electric products , etc .
| Standard configuration of test chamber | Lead hole , can be increased , 4 holes with diameter of 100 mm With soft rubber plug , 2 on the left and right sides of the box Casters , 4 with adjusting feet |
Observation window: multi layer hollow electric heating film heating anti fog observation window - located on the door The electric mist eliminator inside the glass can provide the best observation line of sight . One Lighting lamp | |
| Power distribution control cabinet | One main power leakage circuit breaker, distribution board , exhaust fan and Ethernet physical interface Temperature and humidity controller , AC contactor , circuit breaker , thermal relay
Temperature limiting protector , solid state relay and transformer , etc |
| heater | Fin heater , heater control mode - contactless equal period pulse width modulation , SSR solid state relay |
| Power line hole and drain hole | Located on the back of the box |
| Explosion proof pressure relief port , if have | It is located at the top of the box and automatically opens when the pressure of the test space exceeds the set pressure |
| refrigeration system - if have | |
| operation mode | Mechanical compression single stage refrigeration |
| Refrigeration compressor | Hermetic compressor imported from France |
| Main refrigeration components | Expansion valve , pressure controller , drying filter Refrigeration solenoid valve, reservoir, oil separator, etc |
| evaporator | Finned tube heat exchanger - also used as dehumidifier |
| condenser | Air cooled type , finned tube heat exchanger |
| Throttling device | Expansion valve / capillary |
| Control mode of refrigerator | The control system automatically adjusts the operating conditions of the refrigeration unit according to the test conditions. Compressor return air cooling circuit |
| Control system | |
| Controller model | Professional temperature and humidity controller |
| monitor | High definition color LCD touch screen |
| Operation mode | Program mode and setting mode |
| Setting mode | Color touch, human-computer interaction, Chinese / English interface |
| control mode | Anti integral saturation PID BTC balance temperature control mode |
| Temperature measurement mode | Class A armored PT100 sensor |
| Interconnection with battery testing equipment | |
| Device hardware connection | BTS computer software , battery detection equipment and test box are interconnected by channel line and data communication line |
| others | During the test , opening the door of the test chamber will cause the temperature fluctuation in the chamber , During the test , if the door is opened for many times or for a long time , or the test sample emits wet steam , the heat exchanger of the refrigeration system may freeze and fail to work normally |
