|
[China]
Trade Verify
Address: Room 322, Building 3, No. 801, Qiaoxing Avenue, Xiaoluo Village, Shatou Street, Panyu District, Guangzhou
Contact name:Sammy Qin
Guangdong XWELL New Energy Technology CO., LTD. |
|
Verified Suppliers
|
|
|
0.05 - 0.20 mm Pneumatic Manual AC Pulse18650 Battery Pack Spot Welder
Product Description
Dual pulse welding:
This machine mainly used for 18650 battery pack tab welding, it can
weld Nickel tab thickness from 0.05-0.20mm. You can also choose our
other model according to your tab Thickness.
Dual pulse welding, the first pulse is used to the workpiece
surface coating and oxide removal, and make the contact place in
welding electrode produce slight deformation, improve the effective
contact area, the second pulse is used to ontology metal welding,
can effectively promote the quality of welding and reducing welding
spatter.
Control model:
1. CPU control, precision pulse energy Adjustable(0-99.9%),
preloading time and the holding time Adjustable(0-2.55s)
2. Two different ways of welding, (1) ordinary ; (2) continuous.
3. The built-in counter, all solder joints can be calculated
4. Data storage block using EEPROM, no battery life problem, every
time you boot, go back to Last using the welding procedure.
Product Features
1. XWELL modes of constant instruction and constant current output,
welding can be more flexible selection and control.
2. The preheating current, welding current and tempering current
can be set. The three discharge pulses can be used alone or in any
combination.
3. It has the function of slow rise/slow fall of current: the
function of slow rise/slow fall can avoid splashing during welding
and meet the welding requirements of special materials.
4. Counting function: With counting function, the number of welds
can be counted. With this function, the working efficiency can be
easily understood.
5. It has the functions of fault diagnosis and alarm, such as
current malfunction, overshoot of monitoring value, network voltage
following, etc.
6. Energy-saving: three-phase power supply input, medium frequency
4000Hz output after rectification and inversion, high working
frequency, low transformer loss, obvious energy-saving effect.
7. Fault diagnosis and automatic protection function: In the
working process, if the controller detects abnormal situation, it
will automatically turn off the output and friendly prompt.
8. Communication and BCD code control function: It can be connected
with industrial computer, PLC and other equipment to realize remote
control automation management and provide work efficiency.
Product Specification
| Model | Pneumatic Manual Spot Welding Machine |
| Source voltage | AC 220V, 50/60HZ |
| Max Power | 3KVA |
| Warranty | One year limited and lifetime support |
| Advantages | 1 Beautiful shape, lighter weight, smaller volume, simple operation 2 Good welding result with small spark, no black, and steady welding current. 3 Digital display setting, Flash storage technology 4 Microcomputer control High frequency precision spot welding machine |
| Welding current | 00-99% |
| Applicable scope | Used for NiMH. NiCd, Li-Ion/LiMnNi. LifePO4, 18650, 26650, 32650 cylindrical battery Ni tab 0.05 to 0.2mm welding |
| Net weight | 40kg |
| Package weight | About 60kg |
| Dimension(L*W*H) | 800*580*1348mm |
| Packing size(L*W*H) | 820*600*1400MM |
Battery spot welding machine details
Battery welding samples
Packing details
