|
[China]
Trade Verify
Address: Room 322, Building 3, No. 801, Qiaoxing Avenue, Xiaoluo Village, Shatou Street, Panyu District, Guangzhou
Contact name:Sammy Qin
Guangdong XWELL New Energy Technology CO., LTD. |
|
Verified Suppliers
|
|
|
Input AC | AC 380V ±15%/50/60±5Hz | |
Output Power | 24 KW | |
Input Current | 42.9 A/Phase | |
Input Power | 28.2 KW | |
Voltage | CV output range | 3~70V |
Min discharge voltage | 3 V | |
Accuracy | ±(0.02% of FS+0.02% of RD) | |
Stability | ± 0.1% of FS | |
Current | Output range/channel | 0.5A~10A |
Accuracy | ±(0.05% of FS+0.05% of RD) | |
CV cut-off current | 0.2A | |
Stability | ± 0.1% of FS | |
Power | Output power/channel | 6KW |
Stability | ±0.2% of FS | |
Time | Current response time | Max rising time: 5ms (10% to 90% or 90% to 10%) |
Working step time | ≤(365*24)h/step, Time format-00:00:00.000(h,m,s,ms) | |
Data record | Data record conditions | Min data record interval:10ms (connected with AUX channel:100ms) |
Min voltage change:0.12V | ||
Min current change:0.2A | ||
Frequency | 100Hz (connected with AUX channel:10Hz) | |
Charge | Charge mode | Constant current, Constant voltage, Constant current and voltage,
Constant power |
Cut-off condition | Main channel:Voltage, Current, ΔTime, Capacity,-ΔV | |
Discharge | Discharge mode | Constant current, Constant power, Constant resistance |
Cut-off condition | Main channel:Voltage, Current, ΔTime, Capacity | |
Pulse Mode | Charge | Constant current, Constant power |
Discharge | Constant current, Constant power | |
Min pulse width | 100ms | |
Pulse cycles | up to 32 | |
Chg and Dischg switch | Supported | |
Cut-off condition | Voltage, Time | |
Simulation | Charge | Constant current, Constant power |
Discharge | Constant current, Constant power | |
Cut-off condition | Time,Line number | |
Continuous switching Change and Dischange | One simulation step can realize continuous switching from charging to discharging | |
Limit step number | 1 million | |
Cycle | Max cycles | 65535 |
Max steps | 254 | |
Cycle nest | 3 | |
Protection | Power-off data protection | |
Off-line operation mode | ||
User-defined protection conditions, such as upper and lower limited current/voltage, delay time, temperature, etc. | ||
Efficiency of Charge and discharge | >85% | |
Protection level | IP20 | |
Channels parallel | supported, Parallel channels do not support pulse and simulation testing | |
Channels feature | Independent pairs of closed loop for constant | |
Energy feedback | The discharge energy can be fed back to the grid | |
Channels control mode | Independent control | |
Noise | ≤65dB | |
Database | MySQL | |
Communicatin | TCP/IP | |
Data export | EXCEL,TXT,CSV,PDF,Plot/Graph | |
Disk drive | 500GB | |
Operating system | Windows 7/8/10 64 bit | |
Communication port | Ethernet port, CAN communication supports communication with BMS to obtain cell voltage and temperature in BMS | |
Items | Values | |
Number of channels | 4 | |
Dimensions(W*D*H)(mm) | W*D*H:600*800*1300(mm) | |
Working Environment requirement | ||
Items | Values | |
Operation environment temperature | -10℃~45℃(When the temperature is 25±10℃, the measurement accuracy is guaranteed: accuracy drift 0.005% of FS /℃) | |
Storage environment temperature | -20℃~50℃ | |
Operation environment humidity | ≤70% RH(no moisture condensation) | |
Storage environment humidity | ≤80% RH(no moisture condensation) | |
