Anping Taiye Metal Wire Mesh Products Co.,Ltd |
|
Different Baldes CBT-60 CBT-65 Razor Wire Blade Wire Silver Color Anti Climb
Razor Blade Wire Production Process
The CBT60 spiral razor wire is formed by a thorn rope, and the connection of the interlocking needs to be fixed with a buckle to enhance the stability and fastness of the razor wire. It is protected by its own annular and blade natural wrapping, with dimensions of 1 inch and 2 inches, etc.
The thickness of the CBT65 razor wire roller dia is
450-960mm, the diameter of the inner wire is 2.5, the length of the
knife is 65, the width is 21, and the spacing is 100. These two
types of blade wire can be used for safety protection in the
community wall, playground boundary and other places.
Razor Blade Wire Production Process
1.The stamping forming of the blade is the key
The key step in the production of blade sprocket is to press
different types of blades according to customers' requirements,
such as BTO-10,BTO-22,CBT-60,CBT-65, etc., and then collect them to
ensure the production of the next blade sprocket.
2.How to wrap wire
Wrapped wire is the second key steps of the production blade thorn
rope, just as its name implies something wrapped yarn is wrapped in
wire, we here wrapped yarn is put in advance in sheet stamping good
blade, after wrapped tightly wrapped in wire machine together,
make it difficult to separate, we went to this step completes the
blade razor wire of semi-finished products.
3.How to cut the clip with the blade
Every two adjacent circles of spiral blade are fixed together by
manual or small instruments with blade rope connecting clips at
intervals of 120 degrees or 72 degrees, forming a beautiful
interlocking ring when the installation is unfolded.At this time,
we do not need to carry out packaging, we will proceed to the next
step of plastic spray.After that, we will pack the blade and wire,
and then send it to the logistics to the customer.
Razor Blade Wire Installation
1. Drill holes in the wall and fix the V-bracket with expansion screws (3.5m to install a V-bracket)
2.The blade barbed wire is fixed to the V-shaped bracket, and the
steel barbed wire is passed through the middle of the blade barbed
wire to support the blade barbed wire.
Razor Blade Wire Picture