|
[China]
Trade Verify
Contact name:Amy
TANGSHAN MINE MACHINERY FACTORY |
|
Verified Suppliers
|
|
|
Recessed Chamber Filter Press Equipment For Beneficiation
Technical characteristics
•The filter plate is made of reinforced polypropylene, molded at
high temperature, and then processed by professional precision
equipment. The formed filter plate has high strength, good
airtightness, light weight, corrosion resistance, non-toxic and
odorless, and meets the relevant sanitary standards.
•The equipment has a high degree of automation, with hydraulic
cylinders compressing, maintaining pressure, compensating pressure,
feeding, returning, and filter plate loosening and unloading cakes.
The entire process is fully automated without manual phased
operation.
• Filtration method: The maximum filtration pressure of the feed
filter pressure tested by the professional department should not be
greater than 0.6MPa. Using within the specified pressure range, it
can not only ensure the best performance of the filter press and
the supporting filter media, but also enable the equipment And the
filter medium (filter cloth) life cycle is maximized.
•Safety device: The filter press is equipped with a variety of
protective devices when automatic operation is realized to prevent
the misoperation of the filter press from over-pressure and
over-limit.
Working Principle
Chamber filter press takes filter cloth as the medium to separate solid and liquid. It is a separating machine with wide rang of particle size. The filter cloth spreads in a filter board surface, it is supported by the swelling groove of filter board, when the filter board is clamped, filter cloth turns to sealing materials, and the cavity between every two filter board forms a separated filter room. During the filter processing, the materials come through the central opening into filter room, the filtrate flow by the feeding pressure, flow out of the filter board after converged. Chamber filter press can be divided into two types according to filtrate discharging ways: open channel flow and under channel flow.
Plate and frame press filter separates solid from the liquid in filter form. It is a separating machine with wide rang of particle size. Materials come through the filter room that made up of filter board and filter frame,under the pressure of feeding materials, the filtrate flow through the medium that made up of filter board and filter frame-fiber gap of the filter cloth, arriving at the pattern surface, flow out of the filter board after converged. The solid that left in the filter frame forms filter cake. Plate and frame filter can be divided into two types according to filtrate discharging ways: open channel flow and under channel flow.
| Name | Recessed Chamber Filter Press Equipment For Beneficiation |
| Model | Filter Press Equipment |
| Attributes | Filter Press For Beneficiation |
Parameter
| Technical parameters | Work length800mm,Max length1200mm | Tank diameter φ360mmx2,press strength 20MPa-25MPa | ||||||
| Filter area(m2) | Number of filter plates | Thickness of filter plates (mm) | Filter chamber volume(m3) | Total weight(kg) | Base size(mm) | Dimension(mm) | ||
| Length | Width | Height | ||||||
| 500 | 69 | 40 | 10 | 32000 | 8190 | 10090 | 3050 | 2500 |
| 600 | 83 | 40 | 12 | 35500 | 9380 | 11280 | 3050 | 2500 |
| 700 | 97 | 40 | 14 | 39020 | 10570 | 12470 | 3050 | 2500 |
| 750 | 105 | 40 | 15.15 | 41000 | 11250 | 13150 | 3050 | 2500 |
| 800 | 111 | 40 | 16 | 42500 | 11740 | 13670 | 3050 | 2500 |
| 900 | 125 | 40 | 18 | 46050 | 12950 | 14850 | 3050 | 2500 |
| 1000 | 139 | 40 | 20 | 49550 | 14140 | 16040 | 3050 | 2500 |
| Nornmal filter flat:Input pressure below 1.0MPa,Tempreture -5° -80c Material of filter flat:Strengthened polypropylene | ||||||||
| Strengthed flat :Input pressure below l.2MPa, Tempreture -5.~120. Material of filter flat:Reinforced polypropylene | ||||||||
Company introduction
Tangshan Mine Machinery Factory is a specialized manufacturer that produces complete sets of equipment for metallurgy, mining, building materials, environmental protection, as well as the design and manufacture of complete sets of sand and gravel materials, and the design and manufacture of dry tailings discharge. The company was founded in 1971 and turned into a joint-stock enterprise in 1997.
The company occupies more than 50 acres, with total assets of 90 million yuan and more than 200 employees, including 96 engineering and technical personnel.
Various processing and testing equipment: 8 meters, 5 meters, 4 meters vertical lathes, 8 meters, 5 meters, 3.15 meters gear hobbing machine, 6 meters planer, precision boring machine, medium frequency quenching and other larger processing equipment and automatic welding, ultrasonic welding More than 300 sets of flaw detectors, W15-23 material testing machines, aging vibration devices, etc.
The main products are: various models and specifications of Jinma brand crushers, ball mills, classifiers, magnetic separators, dewatering screens, linear screens, screening machines, feeders, vertical roller mills, etc.
Among them, 17 products have obtained national patents. Among them,
the crusher and ball mill have won many national honors.
FAQ to save your precious time!
Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine.
Our company welcomes customers to visit our factory at any time.
Q2: How long is the warranty period of your equipment? Does your
company provide spare parts?
Answer: The warranty period of our machine is one year. For those
wearing parts, we guarantee to provide high-quality parts for a
long time.
Q3: How long does it take to deliver?
Answer: Production usually starts after receiving the advance
payment. Small machine is guaranteed to be delivered within one
month. Large-scale machine is guaranteed to be delivered within 2-3
months.
Q4: Do you provide machine operation guidance?
Answer: Yes. We have professional engineers for installation,
commissioning and operation guidance.
