|
[China]
Trade Verify
Contact name:Amy
TANGSHAN MINE MACHINERY FACTORY |
|
Verified Suppliers
|
|
|
Yellow Vacuum 1.5kw Power Permanent Magnetic Filter
Introduction
The machine is a top-feeding, drum-like, outside-filtering vacuum permanent-magnetic filter, suitable for dewatering of coarse and strong-magnetic particles. Inside the drum is a strontium ferrite permanent-magnetic, which enables the magnetic particles to be absorbed on the filter cloth quickly.
The magnetic filter is mainly for dewatering of ore pulp containing coarse and strong magnetic particles. Due to the top feeding design, particles are obviously stratified in the filter cake according to their grain sizes. When the magnetic concentrate is shaped into filter cakes, the coarse particles move faster than the fine particles toward the filter cloth under the effect of gravity and magnetic force.
USE
This kind of filter is an outside vacuum permanent magnetic filter
with drum-like-surface at the up fillings entrance part.lt can be
mainly applied to dehydration of ferromagnetic materials with
comparatively rough grain.
PRINCIPLE
Filter mainly rely on the effect of open magnetic system which
rowed by permanent magnet internal the cylinder, to form filter
cake.When the magnetic materials putted into the feedbox, the solid
particles of magnetic material absorbed to the cylinder filter
rapidly as magnetic cluster, under the magnetic effects and their
own gravity (At the moment, it can make use of amount of compressed
air to blast to help the mineral particles on the filter cake
layering by granularity). Due to the upper material, the effect of
layering the mineral among the filter cake by granularity is more
obviously, thick structure with great permeability along with the
drive cylinder enter the dewatering zone. On the effect of
vacuum,the residual water among the filter cake through the filter,
then pass the screening room and the two heads of vacuum tube
distribution road be singled out. Materials that have been
dehydrated blowed down by the compressed air in unloading
zone.Filter access to clean area after discharge. Cleaning is the
turn of the blast and water.Forced by the compressed air, the water
was blowed out of the cylinder so that established a better
cleaning process.
| Name | Yellow Vacuum 1.5kw Power Permanent Magnetic Filter |
| Power | 1.5kw |
| Model | Permanent Magnetic Filter |
Technical Specifications
| Model | GYW-3 | GYW-5 | GYW-8 | GYW-12 | GYW-20 |
| Filter area m2 | 3 | 5 | 8 | 12 | 20 |
| Cylinder size Diameter length | 1600 700 | 2000 900 | 2000 1400 | 2000 2000 | 2250 2650 |
| Rotating speed of cylinder r/min | 0.5-2 | 0.5-2 | 0.5-2 | 0.5-2 | 0.5-2 |
| Magnetic induction intensity of cylinder surface mT | 82 | 82 | 82 | 87 | 87 |
| Concentrate moisture % | 8-11 | 8-11 | 8-10 | 8-10 | 8-10 |
| Production capacity t/h feeding size 0.15-0.8 | 6-9 | 9-13 | 15-25 | 22-33 | 54-108 |
| Motor Power kw | 1.5 | 1.5 | 1.5 | 2.2 | 4 |
| Vacuum kPa | 60-80 | 60-80 | 60-80 | 60-80 | 60-80 |
| Pumping rate m3/min.m2 | 0.5-2 | 0.5-2 | 0.5-2 | 0.5-2 | 0.5-2 |
| Blast pressure (Continuous blowing) Mpa | 0.01-0.03 | 0.01-0.03 | 0.01-0.03 | 0.01-0.03 | 0.01-0.03 |
| Blast pressure (Continuous blowing) m3/min.m2 | 0.1-0.5 | 0.1-0.5 | 0.1-0.5 | 0.1-0.5 | 0.1-0.5 |
| Filter dewatering zone angle (degrees) | 176 | 176 | 176 | 176 | 176 |
| Angle of unloading area (degrees) | 21 | 21 | 21 | 21 | 21 |
| Regeneration area angle (degrees) | 100 | 100 | 100 | 100 | 100 |
| Gross weight kg | 3265 | 3935 | 4754 | 5494 |
Company Inroduction
Tangshan Mine Machinery Factory is a specialized manufacturer that produces complete sets of equipment for metallurgy, mining, building materials, environmental protection, as well as the design and manufacture of complete sets of sand and gravel materials, and the design and manufacture of dry tailings discharge. The company was founded in 1971 and turned into a joint-stock enterprise in 1997.
Various processing and testing equipment: 8 meters, 5 meters, 4 meters vertical lathes, 8 meters, 5 meters, 3.15 meters gear hobbing machine, 6 meters planer, precision boring machine, medium frequency quenching and other larger processing equipment and automatic welding, ultrasonic welding More than 300 sets of flaw detectors, W15-23 material testing machines, aging vibration devices, etc.
The main products are: various models and specifications of Jinma brand crushers, ball mills, classifiers, magnetic separators, dewatering screens, linear screens, screening machines, feeders, vertical roller mills, etc.
Among them, 17 products have obtained national patents. Among them,
the crusher and ball mill have won many national honors.
FAQ
Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine.
Our company welcomes customers to visit our factory at any time.
Q2: How long is the warranty period of your equipment? Does your
company provide spare parts?
Answer: The warranty period of our machine is one year. For those
wearing parts, we guarantee to provide high-quality parts for a
long time.
Q3: How long does it take to deliver?
Answer: Production usually starts after receiving the advance
payment. Small machine is guaranteed to be delivered within one
month. Large-scale machine is guaranteed to be delivered within 2-3
months.
Q4: Do you provide machine operation guidance?
Answer: Yes. We have professional engineers for installation,
commissioning and operation guidance.
