Wuxi Orient Anti-wear Engineering Co.,Ltd. |
Cr-Mo Alloy Steel Casting of Discharge End Liners for Ball Mill
Parts
Specification
1.Material:Cr-Mo Alloy Steel
2.Hardness:HRC33-42
3.Impact Value:More than AK50J
4.Application:Mining Industry
5.MOQ:2tons
Our company is a Chinese specialized manufacturer of alloy steel castings.
We can produce alloy steel castings as per the drawings of customers.
Now we have been the regular suppliers of mill liners for Metso;Connect,Australia;
DuoBaoShan Coal Mill.
Product Features
We produce every casting with strict control procedures, must by
the quality inspection department quality inspection before
delivery, to ensure that each factory the quality of the products.
The use of Discharge End Liners,reduce cost of investment castings
and wear,more can reduce due to often shutdown losses as a result
of the replacement parts,greatly improve the work efficiency.
We can according to individualized requirements of customers.
Products through scientific and strict smelting,casting,heat
treatment process,greatly improving the wear resistance.
Technical Parameters
Item | Cr-Mo Alloy Steel Ⅰ | Cr-Mo Alloy Steel Ⅱ | Cr-Mo Alloy Steel Ⅲ |
C | 0.3-0.5 | 0.65-0.90 | 0.4-0.9 |
Si | 0.15-1.20 | ≤0.75 | 0.7-1.2 |
Mn | 0.4-1.2 | 0.5-1.2 | 0.6-1.0 |
Cr | 1.7-2.5 | 1.5-2.5 | 4.0-7.0 |
S | ≤0.04 | ≤0.06 | ≤0.04 |
P | ≤0.04 | ≤0.06 | ≤0.06 |
Mo | ≤0.5 | ≤0.5 | ≤0.15 |
Cu | 0.1-0.6 | ≤0.25 | 0.2-0.4 |
Ni | ≤0.5 | ≤0.3 | 0-0.3 |
Re | ≤0.02 | ≤0.02 | ≤0.02 |
Equivalent Specification | DL/T 681-1999 GB/T26651-2011 | AS2074L2B Mod | DL/T 681-1999 |
Material Type | Martensite Steel | Martensite or Pearlitic Cr Mo Steel | Martensite Steel |
Hardness | HRC≥48 | HB470&HB321-370 | HRC≥50 |
Impact Value | AK≥40J | - | AK≥10J |
Product Photo
Production Facilities
Induction Electrical Furnace
Heat
Treatment Electrical Furnace
Inspection Facilities
Spectrometer Portable Hardness Tester UT Test Electronic Metallographic Microscope
Our Services
We supply the following services:
1. Production of qualified wear and heat castings;
2. Design and installation of the boltless mill liners;
3. Consulting service of material selection of the mill liners
under specific working condition to achieve
longer service life;
4. Consulting service of production & fineness improvement of
grinding mills.
5.We can provide OEM/ODM for our clients.