Active Member
|
[China]
Address: Longyun Rd, ZhouzhuangTown, Jiangyin, Jiangsu, China
Contact name:Cherry Feng
Jiangsu Wanshida Hydraulic Machinery Co., Ltd. |
|
|
Technical Parameters:
Model | Y83Q-6300C |
Cylinder pushing /shearing force | 630 ton |
Maximum working pressure | 20MPa |
Capacity | 15-20 tons/h |
Press room open size | 6000×2500×795mm |
Bale dimensions (L×W×H) | (500-800)×800×(400-600)mm |
Max scrap thickness | 5mm |
Cutting Speed | 2-3 times/min |
Hydraulic Oil Cooling system | Air cooling system |
Motor | 360kW |
Baler dimensions (LxWxH) | 15500×29600×4150mm |
Weight | 110000KGS |
Scrap size can be cut | Square Steel: 100×100mm Angle Iron: 180×180×15mm(3pcs) Round Steel:D110mm I Steel:320×132×11.5mm Steel plate:30×450mm Channel Steel: 320×90×10mm |
The Y83Q series scrap metal shear baler is fabricated by absorbing the advanced technology of similar products like the metal baler and the metal shear at home and abroad, combing the needs of customers and our actual operating situations.
Configured with hydraulic drive system, our machine can be operated
under manual control or automatic control of PLC. The size of
compacting box, bale size and baling mode can be designed specially
to meet users' needs. Our machine can be equipped with motor or
diesel engine as required. Additionally, we are able to help users
to install and debug the machine and train the operators.
Application:
This scrap metal shear baler is capable of cold pressing various
thin metal materials with the thickness less than 3mm into
rectangular bales at normal state, such as waste steel, scrap iron,
wire steel, etc. Moreover, this machine will cut the rectangular
bale into required length, including the steel section that is not
longer than 5m. It makes the waste metal materials convenient for
storage and transportation. This machine is also able to offer
qualified furnace charge for metal smelting plant.
Features:
1. Our scrap metal shear baler is designed reasonably with compact
structure. It is small and lightweight. Aside from small inertia of
movement and low noise, this machine offers stable movement,
flexible operation, low energy consumption, simple installation,
safe and reliable performance, etc.
2. Under the integrated hydraulic and electrical control, it
becomes user friendly and easy for overload protection.
3. This machine possesses a wide range of applications. It is able
to work as processing equipment in metal recycling industry and
smelting field.
Brief Introduction of Baling Process
When the clamping cylinder of the scrap metal shear baler works,
the clamping head is perceived as the locking door, users have to
put the waste materials for baling into the compacting box manually
or mechanically. With the automatic start button pressed by hand,
the left and right clamping cylinders start to work separately to
move the left and right clamping board to the position for closing
the compacting box. The pushing cylinder will move forward to press
the waste materials into bales, accomplishing the baling task.
Next, the clamping head will be opened. The bale ejector will push
the bale at certain distance for cutting with shear cylinder. This
action will be repeated without stop until the bale is about 600mm
long left. Then the cutting job is finished. When the clamping head
works, the bale ejector turns back to its original position. After
the left and right clamping boards are opened again, the automatic
baling and cutting process is done.
The scrap metal shear baler will wait for another manual press on
automatic start button to continue the work cycle. If it doesn't
need to bale and cut any more, users can push the left 600mm bale
out of the equipment by hand.
Gloden supplier for world famous brand:
