Active Member
|
[China]
Address: Longyun Rd, ZhouzhuangTown, Jiangyin, Jiangsu, China
Contact name:Cherry Feng
Jiangsu Wanshida Hydraulic Machinery Co., Ltd. |
|
|
Our Q43-1000 Scrap Metal Shear/ alligator shear is commonly applied in the small sized metal processing factory and waste metal recycling unit. It can be designed in integrated structure with the connected mainframe and the hydraulic station on the basis of customers' demands. Thus our product becomes space saving, convenient for delivery and operation.
This alligator shear incorporates a series of features. Therein, the hydraulic transmission makes it work stably, safely and reliably with low noise. Meanwhile, this product can be manipulated through buttons or foot pedal. Nowadays, it has been exported to Ukraine, Russia, India and other countries.
Technical Parameters:
Model | Q43-1000 |
Cutting Force | 1000Kn |
Press Scrap Force | 80Kn |
Length Of Blade | 800Mm |
Jaw Size | 285Mm |
Motor Power | 11 Kw |
Cycle Time | Sec |
Dimensions | mm |
Weight | Kgs |
Scrap Be cutted | Size of scrap be cutted |
Round Steel | Φ40mm |
Square Steel | 35×35mm |
Angle Steel | 80×80×6mm |
Channel Steel | 140×60×8mm |
Steel Plate | 18×180mm |
This Q43 series alligator shear is mostly applied in the metal
recycled processing plant, disassembling field of scraped vehicles,
smelting and casting fields and other industries. It is able to
process the steel section in different shape and diversified waste
structural metal like round steel, square steel, angle iron, I
steel, plate steel and steel pipe into the qualified furnace charge
through cold cutting. Added with appropriate devices, our product
can work as the length shearing equipment for small sized steel
section in rolling mill.
Construction
In the standard structure of the alligator shear, the mainframe and
the hydraulic station are separated. Therein, the main frame is
composed of cutting blade holder, blade moving bracket driven by
shearing cylinder, holding plate driven by holding cylinder,
adjusting device and so on. As for the small nonstandard machine,
the mainframe and the hydraulic can be integrated together as
customers require. Moreover, the clamping cylinder can be removed
depending on the cutting conditions.
Operation Mode
Special design is in consistent with customers' needs. This machine
can apply manual feeding device, manual shearing system for single
cutting or automatic continuous cutting system. As to the small
sized machine, the foot pedal can be used for control.
Features
1.Under the hydraulic drive, this alligator shear is safe, reliable
and convenient for manipulation.
2. The blade opening length varies, including 400mm, 600mm, 700mm,
800mm, 1000mm, 1200mm, 1600mm and 1800mm. The shearing force is
classified into eight grades, ranging from 63ton to 500ton. Users
can select the machine with different force and blade opening size
in certain range based on the working scale and shearing
requirements.
3. It doesn't need the foot bolts to install the machine.
4. At the place where there is no power supply, the equipment can
be powered by the diesel engine.
Our 100ton scrap metal shear:
May you need larger cutting machine:
Are you looking for baler press for scrap aluminum, cans, tin cans?
Here is our 250 ton alligator metal shear photos. It's button control and automatic cutting.:
Smaller cutting force alligator shear:
All these cutted scrap must have a scrap metal baler for compact into bales:
630ton waste car baler shear, metal recycling car shearing machine:
