Active Member
|
[China]
Address: NO. 58, Hetang Road, Luyang Industrial Park, Hefei City, Anhui Province, China
Contact name:Andy Cai
Hefei Leadall Automation Equipment Co.,Ltd |
|
|
Two In One Full Automatic Face Mask Making Machine / Surgical Mask Making Machine For Flat Face
Automatic Face Mask Production Line Introduction:
This machine is a Surgical Mask Machine with fully automatic to produce the outside earloop & inside earloop face mask. The proced is from raw feeding material, welding earloop& welding nose wire to finished product. It can be used in Hospital mask.
This machine is a fully automatic machine to produce the outside earloop&inside earloop face mask. The process is from raw material feeding,earloop welding&nose wire welding to finished product.
LA-2T1 series full-automatic mask production line is our latest product, with fine workmanship, stable performance and high production efficiency.
The disposable mask production line adopts a “one drag two” design, that is, a mask forming machine, two ear band welding machines (outer ear bands) are connected through a one-to-two transmission line.
LA-2T1 can realize the full-automatic production process from coil feeding, folding and pressing, and slitting, ear band feeding, welding, and unloading.
LA-2T1 can produce disposable masks with a size of 175 * 95mm (adult). The daily production capacity is 120000-150000PCS (24h).
Feature:
1. Multifunction and Higher Efficiency, lower trouble.
2. Stainless steel structure, independent electrical control box, machine compacted, small occupy.
3. The parts surface adopts chrome dealing, covering parts of stainless steel, looking beautiful and clean.
4. Automatic piece Account, Machine with Stop Protection.
Technical parameters:
| Product Name | Automatic Medical Face Mask Making Machine |
| Material | Aluminium alloy |
| SIze | 6400*3200*1680mm |
| Voltage | 220V |
| Power | 11KW |
| Pressure | 6kg/cm2 |
| Yield | 100-120pcs/min |
| Control Mode | PLC |
| Equipment size | Exterior color | equipment weight | Equipment capacity | rated power | Rate of qualified products | Equipment failure rate |
| 5500*3500*1600mm | International standard off-white | <3000kg | 6000-7200pcs/h | 10kw | 99% | <2% |
Mask Forming Machine Introduction:
The LA-2T1 “ one-to-two” full-automatic flat mask making machine production line adopts advanced design. It only needs to place the production of raw materials on the feeding rack. After the modulation is completed, the machine can realize automatic production. Only one person needs to operate the packaging, which fully realizes the entire automated production.
Ultrasonic welding, beautiful style, hygienic and environmental protection.
Operating environment: temperature 10-50 ℃, humidity 5-50%, non-flammable, corrosive gas.
Mask forming machine output:
The LA-2T1 face mask making Machine‘s output is 80-120 pieces per minute, the length of the bridge of the nose bridge is adjustable, and the product size error is ± 1mm.
According to demand, some molds can be replaced to realize a
variety of mask sheets.
LA-2T1 can manufacture kinds of non-woven face mask: Cloth masks,
gauze masks, activated carbon masks, double nose line masks, etc.
Supporting 1-4 layers of non-woven mask sheet production.
Mask forming machine technical parameters:
| Equipment size | Voltage | Productivity | Sub-power |
| 3345*630*1830mm | AC 220V；50-60Hz | 80-120Pcs/mins | 2.7KW |
Ear band welding machine introduction:
This equipment adopts an ultrasonic welding process. The elastic bands are fused on the inside of the two ends of the mask body.
It is the last processing step of the production of ear band masks. Only one operator needs to place the mask body piece by piece in the mask plate.
To the finished product is completed automatically by the equipment.
This machine adopts servo, step drive, precise transmission, and adjustable speed.
This equipment adopts ultrasonic welding process. The elastic bands are fused on the inside of the two ends of the mask body.
It is the last processing step of the production of earband masks. Only one operator needs to place the mask body piece by piece in the mask plate.
To the finished product is completed automatically by the equipment.
Earband welding machine technical parameters:
| equipment size | voltage | Productivity | Sub-power |
| 1915*855*1780mm | AC 220V；50-60Hz | 50-60 PCS/min | 2.7Kw |
Raw materials for manufacturing face mask:
| 1 | Two layers of PP non-woven composite fiber (about 30g). |
| 2 | The middle layer is meltblown cloth (about 25g). |
| 3 | Nose bridge strip PP3 mm. |
| 4 | Earband is round with a diameter of 2.5-3mm. |
Specifications of production materials:
| Item | Number of hanging shafts | Width(mm) | Coil outer diameter | Inner diameter of barrel | weight |
| Cloth | 3 | 170-200 | 600 | 76 | Max 30kg |
| Bridge of nose | 1 | 3-7 | 400 | 76 | Max 30Kg |
| Earband | 4 | 3 | —- | —- | —- |
After-sales service:
| 1 | After the installation and commissioning of the equipment is completed, technical handover and operation and maintenance training for production personnel and equipment maintenance personnel are conducted, and the equipment can be operated and used only after qualified training. |
| 2 | The equipment maintenance period is 12 months from the date of equipment delivery. |
| 3 | Paid repairs and maintenance after the warranty period expires. |
| 4 | Response time for repair: 2 hours, repair time: 7 working days. |
| 5 | Problem resolution time: 48 hours (working day). |
Machine details:
Disposable face mask products:
