|
[China]
Trade Verify
Address: No.9, FuRong Rd, XiaGang, Changan, Dongguan, GD 523861, China
Contact name:Paul Jiang
Dongguan Klair Filtration Technology Co., Limited |
|
Verified Suppliers
|
|
|
Hot Sale Super Thin HEPA Filter FFU (Fan Filter Unit) with HEPA Filter
Description:
Klair thin FFU is generator set with super thin motor inside which is used in the turbulent layer and laminar flow clean room, where have limited installation space. Its speed can also reach to 0.45m/s ±20% same as other FFU.
It is 100mm thinner than the ordinary FFU.The material of cabinet is stainless steel, Galvanized steel with aluminum painting, Cold rolled steel with epoxy powder and so on. It is lighter, corrosion-resistance, rust-resistance and beautiful.
Inside equipped with overheating protection, the surface is smooth and bright, lower air resistance and good sound insulation. Special air entrance design can low down the noise effectively .
Features:
1. Overheating protection
2. The average air velocity increase to 25% Long-life span,
energy-saving, low noise, less maintenance, small vibration and
adjustable speed. The average air velocity increase to 25%.
3. Life-long span It works as an average air speed of 0.45m/s. The
outlet speed is stable and can shorten the period the replace
filters. In the meantime, it can extend the service life of fans.
4. Space-saving
Advantages:
* Solid structure, stable filtration effect and longer service life
* Robust, efficient and easy to handle
* Low initial resistance loss
Specifications:
Voltage: 120/240 V
Material: Galvanized Zinc Coated Steel, Powder baked epoxy
finishing steel or Stainless steel
Size: 575*575*250, 600*600*180,1175*575*180,1210*600*180
Filter: ULPA, HEPA
Filter Replacement Access: Room-Side, Top Side
Noise Level:56-60dBA
Fan Type:Aluminum Turbofan
Product Name:Thin Fan Filter Unit
Filtration Grade:HEPA Filter
Certificatie:ISO16890/CE
Transport Package:Standard Export Packing
Trademark:3QHJ
Parameter list:
| MODEL | KK-AS-2X2 | KK-BS-2X2 | KK-AS-4X2 | KK-BS-4X2 | |
| SIZE(WxDXH.MM) | 575x575x180 | 600x600x180 | 1175x575x180 | 1210x600x 180 | |
| HEPA FILTER SIZE(.WXDXH.MM) | 570 x 570x50 | 595 x595x50 | 1170x570x50 | 1205 x595x50 | |
| CLEANLINESS OFLOCALIZED AIR | Class 100 or equivalent as per Federal standard 209E | ||||
| HEPA FILTER EFFICIENCY | 99.99%(Standard),99.995%,99.99995% | ||||
| AIlRVELOCITY (M/S) | 0.45M/S or 90 FPM | ||||
| AVERAGEAIR FLOW (M3/H) | 600 | 600 | 1200 | 1200 | |
| POWER SUPPLY | AC,1 PH,220V,50/60Hz or DCmotor | ||||
| POWER CONSUMPTION (APPROX) | 130-180w | 130-180w | 130-180w | 130-180w | |
| PRE-FILTER | Nylon Mesh | ||||
| CONSTRUCTON | CASING | Galvanized Zinc Coated Steel, Powder baked epoxy finishing steel or Stainless steel | |||
| NOISE | 56-60dBA | ||||
| WEIGHT( APPROX.) | 15 KGS | 15 KGS | 15 KGs | 15 KGS | |
