Wu Han Micro Control Electric Co., Ltd. |
|
Center Ring Magnetic Powder Clutch Torque 200NM 3A Voltage 24V Alternative Mitsubishi
Features of magnetic powder clutch
1. The user just adjust the excitation current of the magnetic powder clutch can accurately control the torque, so as to effectively control the size of the load resistance. Usually continuous sliding friction parts will be fever, and even burn out.But this equipment has the complete radiator, long time operation is not too hot, and long service life.
2. The friction part will generate heat inevitably or even
destroyed when it keep continuous sliding. But this device has a
complete cooling set, it will not generate a lot of heat after long
time running and it has a long service life.
Belief introduction
A magnetic powder clutch is a special type of electromagnetic
clutch which does not use friction plates. Instead, it uses a fine
powder of magnetically susceptible material (typically stainless
steel) to mechanically link an otherwise free wheeling disc
attached to one shaft, to a rotor attached to the other shaft.
When a magnetic fieldis applied to the powder, it forms chains
connecting the disc and rotor. The strength of the chains depends
on the strength of the magnetic field. We use the finest materials
available for magnetic components to yield high friction indexes,
as well as premium non-asbestos linings to improve response time
and extend working life. We will be reliable brake supplier for
you.
Item | Torque | Voltage | Speed | Max current | D0 | D1 | D2*L1 |
TL6B-1 | 6 | 24 | 1400 | 0.8 | 130 | 50 | 60*16 |
TL12B-1 | 12 | 24 | 1400 | 1 | 157 | 63 | 70*18 |
TL25B-1 | 25 | 24 | 1400 | 1.5 | 182 | 71 | 80*21 |
TL50B-1 | 50 | 24 | 1400 | 1.8 | 219 | 85 | 95*22 |
TL100B-1 | 100 | 24 | 1000 | 2 | 290 | 105 | 125*24 |
TL200B-1 | 200 | 24 | 1000 | 3 | 335 | 125 | 140*28 |
TL400B-1 | 400 | 24 | 1000 | 4 | 398 | 160 | 180*30 |
Item | D3*L2 | D4 | L3 | L4 | L5 | d | t | 6-s2 | 6-s1 | 6-s3 | Net weight |
TL6B-1 | 62*6 | 70 | 64 | 91 | 3 | 16 | 5 | M4 | M5 | M5 | 3 |
TL12B-1 | 72*7 | 80 | 77 | 107 | 3 | 20 | 6 | M4 | M5 | M5 | 6 |
TL25B-1 | 82*10 | 97 | 88 | 125 | 4 | 25 | 8 | M5 | M6 | M6 | 9 |
TL50B-1 | 97*11 | 110 | 103 | 144 | 4 | 30 | 8 | M6 | M6 | M8 | 14.5 |
TL100B-1 | 128*14 | 145 | 137 | 183 | 5 | 35 | 10 | M8 | M8 | M8 | 33 |
TL200B-1 | 145*17 | 165 | 145 | 200 | 5 | 45 | 14 | M8 | M10 | M10 | 48 |
TL400B-1 | 190*20 | 210 | 193 | 251 | 5 | 60 | 18 | M10 | M12 | M12 | 75 |
We can also can supply powder brake with mounting brackets as left
figure.
1. Volatge: dc 24v
2. Magnetic powder clutch/brake 0.6KG-40KG stock supply
3. Imported highly magnetized magnetic powder
4. Imported wool felt and NSK bearings operate smoothly
5. Coil 100% use enamelled copper wire
6. Cast steel material
Magnetic powder clutch work principle:
Magnetic particle clutch | brake is a type of auto-control
component with high-performance which uses driving and driven units
as main body, powder (magnetic powder) with high magnetic
conductivity as working medium and exciting current as control
means so as to achieve control transfer/braking torque and to keep
the linear relationship between input current and output torque.
With the development of the modern industry, it plays an
increasingly important role in all industrial fields and
demonstrates great advantages over other components
The products are widely used in winding and unwinding
starting/braking control, stamping startup, overload protection,
position control, speed control, tension control, artificial load
and relevant fast control systems.