|
[China]
Trade Verify
Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China
Contact name:Tessa Huang
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD |
|
Verified Suppliers
|
|
|
Plug Socket Test Apparatus For Verification Of Maximum And Minimum Withdrawal Force
Standard:
IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes –Part 1: General requirements’ clause 22.1, clause 22.2, figure 18&19 and table 16.
Application:
This device is used for verify whether the maximum withdraw force and minimum withdraw force to pullout a plug or plug pin from socket in the standard range. The structure of electrical accessories should be easy to insert and pull out the plug, and should prevent the plug in normal use.
Feature:
The top plate swivels up from a horizontal position to a vertical
orientation and the clamping device can be rotated in the top
plate. These features allow the device to be set up in many
different configurations to meet different standard requirements.
Standard plugs and weights are supplied to perform testing on
sockets rated up to 16A.
Pin gauges and the appropriate weights for testing minimum
withdrawal force are sold separately. The required dimension of the
pin gauge needs to be specified by the customer.
Test plugs made from hardened steel with roughness not exceeding
0.8mm.
Top plate pivots from horizontal to vertical.
Parameter:
| Test plug | Made of hardened steel. The test plugs and pins will be made according to specific country's plug and socket requirements. |
| Weights | One set. Superposition can be achieved 100N, the force applied by added weight of 1/10 test force |
| Operation | Manual |
| Standard | IEC60884-1 |
Table 16 – Maximum and minimum withdrawal force for plugs and socket-outlets
| Ratings of the accessory | Number of the poles of the accessory | Withdrawal force N | ||
Multi-pin gauge maximum | Multi-pin gauge maximum | Single-pin gauge maximuma | ||
| Up to and including 13 A | 2 | 40 | 1.5 | 17 |
| 3 | 50 | |||
| 5 | 70 | |||
| Up to and including 13 A | 2 | 50 | 2.0 | 25 |
| 3 | 54 | |||
| More than 3 | 70 | |||
| Above 16 A up to and including 32 A | 2 | 80 | 3.0 | 27 |
| 3 | 80 | |||
| More than 3 | 100 | |||
| a These withdrawal forces are only for testing the resilient earthing contact assembly of a plug. | ||||
