Home Companies HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

AC380V 3KW Fuchsine Solution Pressure Tester For Ceramic Material

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Contact Us

[China] country

Trade Verify

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

Contact name:Tessa Huang

Inquir Now

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

AC380V 3KW Fuchsine Solution Pressure Tester For Ceramic Material

Country/Region china
City & Province guangzhou guangdong
Categories Pressure Switches
InquireNow

Product Details

Household Appliance Test Equipment Fuchsine Solution Pressure Test For Ceramic Material

 

Standard:

IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ clause 22.32

 

Application:

Used to determine if ceramic material is tightly sintered.

 

Feature:

Household Appliance Test Equipment

It consists of two parts: Fuchsine and Methylated Spirit test bottle and pressure boosting device.

The ceramic material is broken into pieces that are immersed in a solution containing 1 g of fuchsine in each 100 g of methylated spirit. The solution is maintained at a pressure not less than 15 MPa for a period so that the product of the test duration in hours and the test pressure in megapascals is approximately 180.

The pieces are removed from the solution, rinsed, dried and broken into smaller pieces.

The freshly broken surfaces are examined and shall not show any trace of dye visible to the naked eye.

 

Operation Steps:
1. Fill the tank with water.
2. The sample is placed in a container bottles.
3. Set pressure.
4. Tighten the pressure relief valve.
5. Turn on the power switch.
6. Set the test time. Note: This time is only to prompt the test time is up. It does not automatically relieve pressure. How to relief: Please loosen the pressure relief valve.
7. Press the start switch for testing.
8. Test to complete. Note: the need to manually unscrew the pressure relief valve.

 

Parameter:

No.ItemParameter
1Power sourceAC380V,50Hz
2Power3KW
3Test pressure0.5-20MPa±0.5MPa
4Reminder time of test completion3 minutes, Household Appliance Test Equipment
5Test time1~999H
6DimensionsL*W*H=1200mmX450mmX1500mm

 

Hot Products

IEC Test Equipment Ageing In An Air Bomb/Oxygen Bomb 0.55MPa Test Pressure Standard: IEC 60811-11-2 ...
IEC Test Equipment Thermal Ageing Oven with 1000L Volume Temperature range RT+10℃-200℃ Standard: IEC ...
IEC 60335-1 Test Equipment Cable Flexing Test Apparatus Figure 8 Standard: IEC 60335-1 Household and ...
Cold Bend Test Apparatus Manual Control IEC 60811 Test Equipment Standard: IEC60811-1-4 Common test ...
IEC Test Equipment Figure B.1 Calibration Device For Spring Hammer Test Apparatus Standard: IEC ...
IEC Test Equipment Flexible Cable Flexing Test Apparatus Flexing Angles Adjustable Standard: IEC ...