|
[China]
Trade Verify
Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China
Contact name:Tessa Huang
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD |
|
Verified Suppliers
|
|
|
ISO6722-1-2011 Abrasion Resistance Testing Machine Auto Parts Test Equipment
Standard:
This device meets the standard of ISO6722-1-2011,GB/T25085-2010.
Application:
Suitable for detecting the drag resistance test of automobile wires.The abrasion resistance tester is to fix the product on the fixture at both ends, and the abrasive belt can test the product under certain load, speed and stroke. Auto Parts Test Equipment
Test sample:
Automobile wires.
Feature:
1.The cabinet is treated with electrostatic baking paint. The whole machine has reasonable design, tight structure, safe and stable operation up to standard.
2.Length can be preset, load can be superimposed, humanized design.
Parameters:
| Power supply | AC220V 50Hz. |
| Length range | 0-5000mm |
| Moving speed of sand belt | 1500 ± 75mm / min |
| Round rod supporting sand belt | 6.9mm in diameter |
| Weight support | r114mm, total weight: 60g |
| Load weight | 0.05, 0.1, 0.5, 0.2, 1.5 kg each |
| Angle between sand belt and sample | 29 degrees. Auto Parts Test Equipment |
| Sandpaper material | 150 sandpaper (the total length of abrasive belt is 5000mm, the width is 20mm, the width of conductive strip is 10mm Spacing 75mm) |
| Left and right clamps | the distance between clamps is 500mm |
| Stop function | automatic shutdown when insulation layer is damaged |
| Machine size | about 880 × 420 × 520mm |
| Machine weight | About 50kg |
