|
[China]
Trade Verify
Address: Room 408 No:262 middle West Lake Road, Shilong Town, Dongguan City ,Guangdong Province, China
Contact name:Mag
JULUN (H.K)CO.,LTD (DONGGUAN JULUN ELECTRONICS CO.,LTD) |
|
Verified Suppliers
|
|
|
Non-Combustible Coated Wire Wound Resistor Power Supply
Applicable Scope
This benchmark is the supply of chargers, power supply, and other
energy-saving lamps used in the coating are incombustibility wound
resistor type of specifications.
Mechanical Performance
The terminal shall withstand 4 bends of 90°rotation without any breakage or damage, when the Resistor is fixed in vertical position.
Fixing the resistor body, a static load of 2.5Kg is to be gradually applied into the terminal for 10seconds without causing any looseness and fall.
To bend the lead wire at the point of about 6mm from resistor body to 90°,then catch the wire at 1.2±0.4mm apart from the bend point end and turn it (clockwise) by 360 degrees Perpendicular to the resistor axis at speed of sane 5 seconds per turn, and do the same Counterclockwise again which constitute a whole turn. Repeat the turn for 2 times without Causing any break and looseness.
Thermal fuses, defined as non-resettable, are single action devices
that are widely used for the electrical equipments against over
temperature. The thermal cutoffs are composed of the fusible alloy
with low melting point and special resin, encapsulated in a plastic
or ceramic housing. Under normal operated, the fusible alloy is
joined by the two lead wires within the housing. When the thermal
cutoff senses an abnormal heat and reach a preset temperature, the
fusible alloy melts and disconnects the circuit completely with the
aid of the special resin. Both Axial and Radial shapes are
available, with rated current from 1A to 200A, Function temperature
76℃~221℃, certificated including UL, cUL, VDE,TUV,PSE, KTL, CCC and
RoHS, REACH Compliant.
1. Factory supply directly
2. Completed certificates such as UL,VDE,SGS,etc and high quality available
3. Quick delivery
4. Improve after sales service system
