Chongqing Songyo Auto Parts Co., Ltd. |
Verified Suppliers
|
|
Universal Racing Steering Wheel Manual Steering Rack 96407342 Daewoo
Products detail
Products name | Manual Steering Rack Hydraulic Power Steering Rack |
OE NO. | 96535298 |
Car make | For Chevrolet |
Feature | LHD or RHD |
Condition | 100% new |
Sample | Offer |
Quality | OE quality |
Warranty | 12 months |
Common faults and troubleshooting methods of steering gear
1. Fast steering and heavy fault: Generally, it is the cause of the
booster pump. If you turn the direction slowly when turning, the
direction is still light. If you turn the direction quickly during
a sharp turn, the direction will be heavy immediately. This means
that the effective weight of the booster pump is not enough when
you turn the direction quickly. To the establishment, which
reflects the failure of heavy steering, this type of failure is
mainly in the booster pump. If the booster pump flow control valve
leaks, spring failure, and severe wear of the pump blades and
chamber surfaces will cause this phenomenon.
2. Difficulty in returning the steering wheel
The hydraulic power steering gear is generally a mechanical
failure.
Generally, the steering wheel of a vehicle has the function of
automatic steering return. For hydraulically assisted cars, due to
the action of hydraulic resistance, the automatic return function
has been weakened, but a certain degree of automatic return
capability should be maintained. If the force is also applied when
returning, it means that the returning function is malfunctioning.
This kind of failure generally occurs in the steering mechanical
part. For example, the kingpin and bushing of the steering knuckle
are burnt due to lack of oil, the joints of the steering horizontal
and straight tie rods are lack of oil and rust, the steering wheel
and the steering gear are connected to the steering shaft and the
universal joint is lack of oil and the fire is different, and the
steering shaft sector teeth and pistons of the steering knuckle
Straight teeth and too tight, etc., will cause this failure. There
are also reasons for the failure of the torque sensor in the
electronic power steering.
3. The steering wheel has serious faults on both sides
The main reason for the heavy mechanical aspect of the steering
gear is that the steering knuckle is not maintained for a long
time, so that the steering column and the bushing are seriously
short of oil, wear and even ablation, which will cause the
direction to be heavy. Therefore, during maintenance, the steering
column must be filled with grease into the cavity, and the front
axle needs to be supported by a jack each time the oil is filled,
and the upper and lower bearing surfaces of the column must be
injected until the grease is squeezed out. At this time, it
indicates that the grease is filled between the column and the
bushing. If the plane thrust bearing of the steering column is
severely worn or damaged, it will also cause a fault with heavy
directions.
Company exhibition