High Flow PLC Control Self Cleaning Screen Filter For Agriculture Irrigation

High Flow PLC Control Self Cleaning Screen Filter For Agriculture Irrigation

Self Cleaning Screen Filter WORKING PRINCIPLE

The liquid enters the filter from the inlet(1), flows through the filter element(6) from outside to inside. The filter element bottom is connected to the outlet(2), through which the liquid flows out. After the filter element captures the impurities, the cleaning action is trigger by the preset time or differential pressure value. The gear motor(4) drives the scraping blades(7) to rotate and remove the impurities on the filter element outside surface. The impurities moves off along the blades and falls down to the filter bottom. The rotating plates push the gravity impurities into the collection chamber(5). The impurities are collected at the filter bottom and in the collection chamber. The discharging valve open per the preset time and discharging the waste liquid with high impurity concentration through the drain outlet(3), the purged liquid can be reclaimed if necessary.

Self Cleaning Screen Filter Technical parameters

■A single maximum flow capacity is up to 4000m3 / h
■Wide filtration range:screens from 4000 to 20 microns
■Working pressure(min)≥0.18Mpa
■Working pressure(max)≤1.6MPa(customized is available)
■Working temperature ≤65℃
■Power supply: 380 v / 50 Hz (Customized is availabel)

Self Cleaning Screen Filter material

■Shell: carbon steel, stainless steel
■Screen: 304 stainless steel
■Brush holder: 304 stainless steel, 316L stainless steel
■Drain valve, cast iron,copper,stainless steel,PVC,nylon
■Controller: PVC, aluminum

Self Cleaning Screen Filter structure

Self Cleaning Screen Filter specification table