|
[China]
Trade Verify
Address: No.59 Xinhe Road, Shangmugu, Pinghu, Longgang, Shenzhen, Guangdong, China.
Contact name:Manfrid Lee
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED |
|
Verified Suppliers
|
|
|
Security Access Control Hot Dip Galvanizing Finger Print Full Height Turnstile Gate with Canopy
Functional Overview
The whole product frame adopts stainless steel laser cutting, CNC bending forming, beautiful appearance, and the system adopts standard quick plugging and unplugging electronic interface, which can integrate various reading and writing devices, etc., and can easily add RFID card reader, Fingerprint scanner, Face recognition system etc. The writing device is integrated on the device to provide an orderly and civilized way for the entry and exit personnel, and can prevent illegal personnel from entering and exiting. At the same time, in order to meet the requirements of the fire exit channel, in case of emergency or power failure, the fault protection mode can be actived. That is, the rotating shaft is free to rotate when there is power off or fire alarm.
Basic parameters:
| Cabinet material | 38 round tube, 1.5mm thick SS304 |
| Channel width | ≤ 600mm |
| Ambient temperature | -20 degrees to 60 degrees |
| Working environment | indoor and outdoor (outdoor canopy) |
Technical Parameters:
| Input voltage | 100V~240V |
| Driving voltage | 24V |
| Equipment power | 40W |
| Response time | 0.2S |
| Passing speed | 30 ~35 people / min |
| Communication interface | RS485(optional) |
| Communication distance | less than 1200m |
| Open brake signal input | dry contact |
| Switching door time | Less than 1S |
Main function and features
1. Rainproof housing, anti-corrosion coating iron, 304 or 316 stainless steel.
2. Mechanical drive unit with solenoid locking mechanism eliminate the use of expensive electric motor and reduce maintenance cost.
3. If arm rotated more than half, it will auto-rotate to the next idle position. If arm rotated less than half, it will auto-rotate back to the current idle position.
4. Built in adjustable tensioner to control rotation force to minimize over rotation. Arm just need to be pushed lightly to rotate therefore even elderly or children are able to use the turnstile.
5. Turnstile can be configured to be bi-directional or uni-directional. Housing is locked with special key to avoid tampering.
6. Innovative and unique mounting surface ensures simple and convenient installation for system integrator.
7. Can be used with variety of access control devices: IC / ID card readers, bar-code scanner, fingerprints, etc. (Access controller needed)
8. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.
9. The mechanism is equipped with an automatic regulated hydraulic buffer device. There is no noise and impact when running.
