LED Indicator NFC Drop Arm Turnstile 100W For Entrance Exit Gate

NFC Automatic Access Control Drop Arm Turnstile For Entrance And Exit Gate

PRODUCT DESCRIPTION

Drop arm function turnstile is mainly installed in entrance and exit of shopping mall which has a large flow rate;

it is most popular in supermarket.

Drop arm function turnstile ---can be compatible with IC card , ID card ,barcode card , fingerprint reading card

recognition device used for staff, provide civilized, orderly access methods; effectively manage the access of staff.

Can be widely used in the station, wharf subway, factories, office building, hotel, clubs, intelligent community ,

enterprises and institution that need intelligent access management.

System Integration of the arm drop turnstile
1) Alternative Materials, Finishes and Custom Design
2) Access control System Integration
3) Ticket System Integration
4) Camera System Integration
5) Thermostat System Integration
6) Remote-Controlled Button
7) Usage Counters
8) Waterproof and Dustproof Design: IP41 for mechanical module,IP65 for electric module

OUR ADVANTAGES

• The whole system runs smoothly, low noise, no mechanical impact.
• Self-test function, when power on, system restoration automatic.
• Single directional or Bi-directional is selectable.
• LED indicator.
• Automatic reset function: when tripod turnstile receives an open single, but passenger do not pass through the hallway within a specific time (default 5s), turnstile arm will lock automatically.
• When power off, the arm will drop down automatically, which is complying with fire safety requirements.

PRODUCT TECHNICIAL SPECIFICATION

1. Power Supply: AC220V± 10V, 50Hz / AC110V± 10V, 60Hz
2. Power Consumption: 100W/24V
3. Temperature: -20 to 60 degrees
4. Humidity: < 95%, without concretion
5. Passage Width: < =600mm
6. Passing Speed: 40 persons/min (normal open), 30 persons/min (normal close)
7. Arm Open/Close Time: 1s
8. Input Interface: +12V electrical signal or impulse signal with width more than 100ms, drive current >10mA
9. Communication Interface: RS485 (Distance: < =1200m)

MAIN FUNCTIONS AND FEATURES

1. Single/double walkway--controlled in one direction or both.

2. A valid lock action can allow one passage at one time.

3. Normally open--the machine will unlock when a valid signal is received.

4. It will lock automatically if passage through turnstile is not completed withinpreset time, the set time can be

adjusted via parameter change.

5. LED indicator light :green and red indicate the passing information.

6. Normal open and normal close can be controlled by external button.

7. Auto detect and reset function.

8. The system is equipped with step less position device and the operation process is controlled by sensors

without mechanical impact .

9. Digital-controlled (CNC) processing technology,fine surface treatment and corrosion resistance .

10. Standard external electric interface with photoelectric isolation enchance incorporateall kinds of control

equipments thus extremely convenient for system integration .

11. Remote control and setup .

12. Extended functions: counting, audible and visual alarm,fire alarm and linkage, Photoelectric Beam Detector.

FAQ

1.What type of entry solutions do you carry?
We carry a full range of entry solutions including,tripod turnstile, full height turnstile,flap barrier swing gate and

speed gate etc.

2.Do you do customization?
Yes.we do customization with different sizes and different mechanics according to customer's needs

3.Are you a trading company?Do you only do assembly in house?
No.we are not trading company.Our factory manufactures most of the items including the simple housing till the

complicated mechanics.

4.Do you have inhouse engineering team?
Yes,we do have our inhouse engineeringteam which consist of R&D technical and software development team.

5.What type of access control comes with your machine?
Our machines can be tie with face ID fingerprint sensor,ID/IC card reader, QR code or bar code etc.