|
[China]
Trade Verify
Address: No.59 Xinhe Road, Shangmugu, Pinghu, Longgang, Shenzhen, Guangdong, China.
Contact name:Manfrid Lee
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED |
|
Verified Suppliers
|
|
|
RS485 TCP/IP Interface Slide Type Body Height Glass Barrier Speed Gate
PRODUCT DESCRIPTION
The Sliding Barrier Turnstile Speed Gate offer a reliable and efficient method to ensure only authorized users
are allowed access to each area of a building. It is an attractive swing turnstile that is easily capable of handling
high volume and abusive conditions. The compact unit makes it simple to construct a multiple lane set-up while
the variety in colors allows you to match this turnstile perfectly to your lobby or branding.
The blocking body (gate wing) has a large area and a large blocking height, which is perpendicular to the
ground and realized by telescoping Stop and release. The material of the sliding gate is commonly used acrylic,
plexiglass, tempered glass, etc.
PRODUCT FUNCTION AND FEATURES
1. Fault detection and alarm functions, easy to use and maintenance
2. The running status can be programmed and controlled with the built-in keyboard on the main board
3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working
automatically within the prescribed time and reset again after the default delay (till fully reset)
4. Anti-breakthrough function. The gate is locked automatically until opening signal received
5. Support infrared photocell for anti-pinch and reset function
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),
the system will cancel the authority of the current user automatically
7. Gate can be set as normally open or normally closed
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller
needed)
9. Direction can be set as single-direction or bi-direction
10. LED direction indicator
11. Gate auto opens when power off and auto close when power on
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
PRODUCT SPECIFICATIONS
Model | SN-SLB02 |
Case Material | SS304, 1.2mm thickness |
Production Process | CNC Laser Cutting |
Size | 1200*330*980mm(Customization acceptable) |
Power input | AC100-240V,50/60HZ |
Operation voltage | DC24V, 3A, Power: 40W( Brushless Motor Optional) |
Electromagentic | Duty Cycle 100% |
Passage Width | 550mm |
Flap height | 1400mm(default) |
Flap Material | Acrylic |
Passage direction | Single directional/Bi-directional |
Operating time | 1S |
Throughput Rate | 30-40 persons/minute(Normally Closed) or 40 persons/(Normally Open) |
Reset Time after Power on | 3S |
MCBF | 5,000,000 Cycles |
Reset Time after failure | 10S |
Automatic Reset Function | Automatically locked within set time(Time Adjustable) |
Operation Humidity | 0~90%(No Freezing) |
Operation Temperature | -20℃~+60℃ |
Operation Eenvironment | Indoor,Outdoor(Shelter) |
Protection Level | IP45 |
Communication Interface | Standard RS485 interface, distance ≤1200 meters |
Input Interface | Relay switch signal or 12V electrical level signal or 12V pulse
signal of pulse width > 100ms, drive current >10mA |
High lights of our products
The body is made from brushed stainless steel which creates a seamless and elegant access point to
blend into most indoor environment.
It can be integrated with any kind of access controller system
(e.g.: RFID device, Push button, Fingerprint
and Biometric device).
In case of emergency, the Optical Turnstile arm will open automatically to allow free passage.
Optical Turnstiles are suit for elegant and luxury entrance solutions.
