10mm Frame 2s Roadblock Tyre Killer Carbon Steel 2.2KW Electric Control

Security Roadblock Barrier Metal Steel Iron Spike Anti Terrorism Electro-mechanical Tyre Killer

SINOMATIC Electro-mechanical tire killer

SINOMATIC Electro-mechanical tyre killer is one of the highest security vehicle access control systems in which a vehicle without permission cannot enter. Tyres of the unpermitted vehicle splits open immediately, therefore the vehicle moves only a few more meters and is stopped. Jaws of the tire killer move all together. Electro drive unit is placed to one end of the tire killer, it stands above the ground level and is a complete assembly with the body. In this way, both smooth transmission of motion and minimum effect of external factors are achieved.

ADVANTAGE OF SINOMATIC TYRE KILLER

High security and safety modes.

Spike sectors can move independently.

Manual operation in case of power failure.

High-torque DC motor for greater reliability.

External limit switches provide a failsafe operation.

Emergency lowering or up possible in case of treat or fire.

Indirect drive models can operate independently or traffic barrier unit.

Supply both surface mount type and in-ground type

SPECIFICATIONS

PRODUCT PHOTO

Optional parts
Smart Card Reader
Traffic light
Optional Beam Sensor
Loop Detectors
Biometric Devices etc

MAIN FUNCTIONS & FEATURES

1. Firm and anti-collision. The tyre killer body and spikes are made of 10mm thickness standard Q235

    carbon steel with strong load-bearing and destructive power.The structure is firm and durable.

2. IP68 military protection standard. 

3. Speedy and Low noise.The hydraulic tyre killer is hydraulically powered through both the raise and lower

     cycles, taking much less time and lower level of noise to operate.Typical operating (opening /closing) time

     is 1-2 seconds.

4. Safe and Reliable.Single phase drive motor, or a three phase motor to allow very high frequency of operation.

    This is ideal for large car parks or busy sites. Environment protection, low power consumption and high reliability.

5. Flexible control method, The system support remote control and drive-by-wire typically. For remote control,

    the controller is available to work 30 meters far away from the blocker device(depends on the radio communication

    environment on site).

6. Back up solution,Support manual operate mode,the spikes can lift or fall on level place by manual when power-off.

7. Convenient maintenance. It is easy to check, test and fix the problem.

8. Functional and Manageable: Safety accessories like photocells, inductive loop detectors , beam sensor can

    be integrated to the system very easily.

9. It can be installed with other access control elements (for example bollards, road barrier, turnstiles, fire alarm

    system, traffic light) in order to achieve an access control check-point at the highest level of security.

10. Wide range of optional configurations: Can be custom designed to suit your requirements and can be built

    in an almost infinite range of thickness and length to suit any roadway or level of security.