|
[China]
Trade Verify
Address: No.59 Xinhe Road, Shangmugu, Pinghu, Longgang, Shenzhen, Guangdong, China.
Contact name:Manfrid Lee
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED |
|
Verified Suppliers
|
|
|
PRODUCT DESCRIPTION
ITS-AX2 barrier gate control radar is developed for the entrance and exit management of parking lots or underground garages. It can precisely control the rising and falling of the gate rod by cooperating with the main control board of the gate control system, which could effectively avoid the "accidental injury" of the gate rod to the passing vehicles or pedestrians in the radar field of view,and realize intelligent anti smashing.
it can precisely control the lifting & falling of the barrier arm by cooperating with the main controlboard of the barrier gate control system, which could effectively avoid the "accidental injury" of thebarrier gate arm to the passing vehicles or pedestrians which in the radar field of view.and realizeintelligent anti fall function.
PRODUCT SPECIFICATIONS
| Technology | 79GHz millimeter wave radar sensor,FMCW MIMO |
| Working voltage(V) | 10-16V |
| Temperature Range(℃) | -40~85 |
| Power(W) | <2.5 |
| Protection degree | P66 |
| Connection Interface | RS485/Bluetooth |
| Size(mm) | 107.5*73.2*18 |
| Colour | Black |
| Gross Weight | 315g |
| Left/Right | Default±0.5m (configurable within ±1.5m) |
| Front | Default 3 m(configurable within 6 m) |
| Online debugging | Serial Port/Bluetooth Debug |
| Online update | Serial Port/Bluetooth Upgrade |
| Application | All types of barrier arm(straight, fence, folding,advertising, etc) |
MAIN FEATURES
LED indicators: There are two LED indicators on the surface of the front of radar. The red LED is the power state lamp which will stay on when the power supply is turned on. The green LED is the operating status lamp which will be automatically trigger on when objects detected in the access area and it goes off when there is no objects.
Detection Zone configuration: The default detection Zone of the radar is 3 meters forward times 0.5 meters on the left and right sides. Different detection areas can be configured via mobile APP or debugging software running on uphost computer.
onfiguration parameters saving and reload: Configuration such as detection area could be automatically saved, and the latest configuration parameters after power failure and restart will be reloaded
Firmware upgrade: The firmware can be upgraded online through RS-485 or APP interface with host computer without taking off the cover board and the new firmware can take effect just by restarting the power of radar
Stable performance: Millimeter wave radar sensing capablity stay nearly the same under different light illuminations, climates such as rain, fog or snow and dust.
