|
[China]
Trade Verify
Address: No.59 Xinhe Road, Shangmugu, Pinghu, Longgang, Shenzhen, Guangdong, China.
Contact name:Manfrid Lee
SHENZHEN SINOMATIC TECHNOLOGY CO., LIMITED |
|
Verified Suppliers
|
|
|
Product performance description
79G millimeter wave radar is a more intelligent detection device
developed for parking lot. It does not need complex wiring
construction work, but only needs to be drilled and installed on
the landing bar. It can adjust the trigger range and Angle through
Bluetooth connection to the mobile APP, and can learn the
surrounding environment, identify obstacles, explore and detect.
79G millimeter wave radar adopts waterproof rubber seal ring, excellent waterproof effect, easily adapt to all kinds of bad weather.
Loop detection can only detect large devices such as cars and trucks through magnetic fields, while 79G millimeter wave radar is better because it can detect objects such as pedestrians, children and motorcycles.
The radar mapping range can be changed and adjusted anytime and
anywhere through the small program of Bluetooth APP. There is no
need to worry about the problem of unable to adjust the equipment
status after construction
Suitable for any environment, regardless of road conditions.
More convenient features
Mobile APP debugging
Suitable for all boom types
No need to cut the road and bury the coil during installation
PRODUCT SPECIFICATIONS
| Technology | 79GHz millimeter wave radar sensor,FMCW MIMO |
| Working voltage(V) | 10-16V |
| Temperature Range(℃) | -40~85 |
| Power(W) | <2.5 |
| Protection degree | P66 |
| Connection Interface | RS485/Bluetooth |
| Size(mm) | 107.5*73.2*18 |
| Colour | Black |
| Gross Weight | 315g |
| Left/Right | Default±0.5m (configurable within ±1.5m) |
| Front | Default 3 m(configurable within 6 m) |
| Online debugging | Serial Port/Bluetooth Debug |
| Online update | Serial Port/Bluetooth Upgrade |
| Application | All types of barrier arm(straight, fence, folding,advertising, etc) |
MAIN FEATURES
LED indicators: There are two LED indicators on the surface of the front of radar. The red LED is the power state lamp which will stay on when the power supply is turned on. The green LED is the operating status lamp which will be automatically trigger on when objects detected in the access area and it goes off when there is no objects.
Detection Zone configuration: The default detection Zone of the radar is 3 meters forward times 0.5 meters on the left and right sides. Different detection areas can be configured via mobile APP or debugging software running on uphost computer.
onfiguration parameters saving and reload: Configuration such as detection area could be automatically saved, and the latest configuration parameters after power failure and restart will be reloaded
Firmware upgrade: The firmware can be upgraded online through RS-485 or APP interface with host computer without taking off the cover board and the new firmware can take effect just by restarting the power of radar
Stable performance: Millimeter wave radar sensing capablity stay nearly the same under different light illuminations, climates such as rain, fog or snow and dust.
