Anti-Collision 79Ghz Radar Antenna Sensor For Straight Boom Parking Gate Barrier

Anti-crash radar, make parking management safer

1. High detection accuracy, error of up to centimeters .
2. It can detect pedestrians and avoid hitting people.
3. Driving direction can be determined.
4. High detection probability, more than 99.9% of the car.
5. The detection area can be set flexibly.
6. Powerful functions such as differentiated models can be expanded.
7. Can measure the target height information to reduce the virtual scene.

Product Function

1.barrier gate control radar is developed for the entrance and exit management of parking lots or underground garages. It can precisely control the rising and falling of the barrier boom by cooperating with the main control board of the gate control system, which could effectively avoid the "accidental injury" of the barrier boom to the passing vehicles or pedestrians in the radar field of view,and realize intelligent anti smashing.

2.radar adopts the highly integrated RF chip SOC scheme, which has the characteristics of small size, low cost, all-weather working capability, high
detection sensitivity, high precision, easy to debug&installation, very good stability and reliability.

3.The working frequency of the radar is 79GHz, with Linear Frequency Modulation and Continous Waveform, which makes the available bandwidth up to 4GHz.

4.The radar antenna adopts MIMO array antenna that enables the radar good angular resolution and high angle measuring accuracy.

5. this product can accurately identify and distinguish the pedestrian, vehicle and other targets passing through the barrier boom area, and avoid the accidents of "smashing the vehicle", "smashing the person" and "not dropping the barrier boom".

Product advantages

1. High detection accuracy, error of up to centimeters .
2. It can detect pedestrians and avoid hitting people.
3. Driving direction can be determined.
4. High detection probability, more than 99.9% of the car.
5. The detection area can be set flexibly.
6. Powerful functions such as differentiated models can be expanded.
7. Can measure the target height information to reduce the virtual scene.

More convenient features

Mobile APP debugging
Suitable for all boom types
No need to cut the road and bury the coil during installation

PRODUCT SPECIFICATIONS

MAIN FEATURES

LED indicators: There are two LED indicators on the surface of the front of radar. The red LED is the power state lamp which will stay on when the power supply is turned on. The green LED is the operating status lamp which will be automatically trigger on when objects detected in the access area and it goes off when there is no objects.

Detection Zone configuration: The default detection Zone of the radar is 3 meters forward times 0.5 meters on the left and right sides. Different detection areas can be configured via mobile APP or debugging software running on uphost computer.

Configuration parameters saving and reload: Configuration such as detection area could be automatically saved, and the latest configuration parameters after power failure and restart will be reloaded

Firmware upgrade: The firmware can be upgraded online through RS-485 or APP interface with host computer without taking off the cover board and the new firmware can take effect just by restarting the power of radar

Stable performance: Millimeter wave radar sensing capablity stay nearly the same under different light illuminations, climates such as rain, fog or snow and dust.