1400r/Min Heavy Duty Sliding Gate Motor 500W With Control Box

500W 1400r/Min 3000 Kg Heavy Duty Sliding Gate Motor With Control Box

The heavy duty sliding door operator has a manual unlocking mechanism to move the door in the event of a power outage, and the powerful three-phase self-ventilating gear motor with its oil bath gearbox guarantees intensive use.

A control unit with an inverter and acceleration/deceleration ramps makes the Maxi series industrial sliding door openers not only very safe but also very powerful.

heavy duty sliding door operator,sliding gate motor industrial use,sliding gate complete,automatic sliding double door opener
high power sliding door opener industry gate operator oil hwavy industrial

Packaging Details: Standard Exporting Packing

Measurement of carton box: 34*28*42 cm

Measurement of controller carton box :26*18*10 cm

Weight : 22KG

The main function

1. Digital position detection, long life, high precision and easy debugging.

2. Stable start and stop, fast speed, independent adjustable speed of opening and closing.

3. Intelligent self-check to protect system security at all times.

4. It can be delayed to close the gate and cooperate with infrared protection to realize unattended operation.

5. External pressure wave, infrared, ground sense and other protection devices can be connected.

6. Using learning remote control technology, the operation is simple.

7. Ground sense counting function, suitable for high-throughput application environment.

8. The computer can monitor the device status through the 485 interface.

9. Motor running output, anti-climbing alarm output (both are switch values).

Warnings to installers and users

1. Before installation and use, please read this Manual carefully. 2. Avoid installing the product where there are vibrations, high-

temperature, high-humidity, flammable, explosives, dust or corrosive

gases.

3. As there is high voltage electricity inside the product, non-

professionals should not arbitrarily open the lid to avoid electric

shock. For debugging, look for professionals for help.

4. For loss and damage due to unauthorized changes to the original

design of the product, the original manufacturer will assume no

liability or responsibility.

5. An air-break switch must be connected with the power supply

input connector.

6. Before power on and debugging controller, manually adjust the

barrier to the middle position.

7. The power must be cut off before manually operate the barrier.

8.Make sure that the path is unobstructed when the barrier is running.

9. Safety devices such as Air-wave switch and Photocell are highly

recommended. Check and test them periodically to ensure that they

are effective.

10. Please properly dispose the accessories including plastic bag and

screws to avoid the hazards such as mistaking and chocking.

11. Please keep this Manual properly for reference.